FireyeProgrammer & Amplifier Modules

Fireye Flame-Monitor Amplifier Modules. The Fireye E1R1, EUV1, ERT1

Fireye Flame-3G-OTH-02815 Amplifier Modules are programmer and amplifier modules available in models E1R1, EUV1, ERT1, and EUVS4. These cULus and FM Approved modules offer direct coupling with Insight and Phoenix…

SKU 3G-OTH-02815

Brand

Fireye

Item

Flame-Monitor Amplifier Modules. The Fireye E1R1, EUV1, ERT1

Local availability & support — the Philippines

Delivery: 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
Payment: Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
Ships to: Manila, Quezon City, Cebu, Davao, Batangas

Technical Specifications

Fireye

Models

E1R1, EUV1, ERT1, EUVS4 

Datasheet Content

[{"filename":"EAMP1-Flame_Monitor_Amplifier_Modules_E1R1_EUV1_ERT1_EUVS4_EDC1_EDC2_English_2014-04-03.pdf","text":"\n\n                                                                                                           EAMP1\n                                                                                                     APRIL 3, 2013\n\n                                                                                                               ®\n                                                                                 FIREYE\n                                                                      E1R1, EUV1, ERT1,\n                                                                   EUVS4, EDC1 and EDC2\n                                                                 Flame Amplifier Modules\n                                                                              FOR USE WITH THE\n                                                                      FLAME-3G-OTH-02815™ CONTROL\n                                                       (For use with the Phoenix Scanners see 133-732)\n\n\n                                                                                                     APPROVED\n\n\n\n\nDESCRIPTION\n              The FIREYE E1R1, EUV1, ERT1 and EUVS4 Amplifier Modules are used in conjunction with the\n              FIREYE FLAME-3G-OTH-02815 system. These modules provide flame scanning using any of the FIR-\n              EYE AutoCheck infrared scanners, standard ultraviolet scanners, flame rod, and ultraviolet self-\n              check scanners. After scanner selection the proper amplifier module must be inserted in the Flame-\n              3G-OTH-02815 chassis.\n              Refer to Fireye Bulletin E-1101 for more detailed information concerning the FIREYE\n              FLAME-3G-OTH-02815 system and operation. Also, follow the scanner installation and wiring\n              suggestions found in E-1101 for proper flame scanning operation.\n\n\nAPPROVALS\n              Underwriters Laboratories Inc.:\n              MCCZ File MP 1537\n              Controls, Primary Safety - Listed\n              MCCZ2 File MP1537\n              Controls, Primary Safety - Component\n              MCCZ7 File MP1537\n              Controls, Primary Safety Certified for Canada\n              MCCZ8 file MP1537\n              Controls, Primary Safety Certified for Canada - Component\n              Acceptable by: Industrial Risk Insurers (I.R.I.)\n              Factory Mutual Approved\n\n                                                                                                                1\n\f                                                                                                 \n\n\n\n\nFLAME AMPLIFIER SELECTION\n                     FIREYE PART NUMBER                      DESCRIPTION                             USE WITH SCANNER\n\n                            EUV1                STANDARD UV AMPLIFIER                          UV1A, UV8A, 45UV3, UV90\n\n                           E1R1 *               AUTOCHECK INFRARED AMPLIFIER                              48PT2\n\n                            E1R2                AUTOCHECK INFRARED AMPLIFIER                              48PT2\n                                                  (FOR SPECIAL APPLICATIONS\n                                                   ONLY) CONSULT FACTORY\n\n                            ERT1                RECTIFICATION AMPLIFIER                                  69ND1\n\n                           EUVS4                SELF-CHECK UV AMPLIFIER                         45UV5-1007/1008/1009\n\n                           E1R3 *               AUTOCHECK INFRARED AMPLIFIER                              48PT2\n\n                            EDC1                Direct coupled amplifier                             Insight, Phoenix\n\n                            EDC2                Direct coupled amplifier                             Insight, Phoenix\n\n                    * The E1R1 is not to be used with solid fuel applications. It is designed for oil fog rejection. The E1R3 is\n                   suitable for all fuel applications and does not contain oil fog rejection. Equipment should be tested for the\n                                proper application of this amplifier to avoid property damages or personal injury.\n\n\n              WARNING: E1R2 and E1R3 are not replacements for E1R1. E1R2 has increased flame sensi-\n              tivity which may result in unsafe operation if not properly applied. E1R3 does not provide oil\n              spray rejection protection which may result in unsafe operation if not properly applied.\n              Consult factory before installation.\n\n\n\nFLAME SCANNERS\n\n\n\n\n              CAUTION: The UV1, UV2, UV8A, UV90 and 45UV3 ultra-violet flame scanners and associ-\n              ated amplifier modules are non self-checking UV systems and should be applied only to burn-\n              ers that cycle after (e.g.: a minimum of once per 12 hours) in order for the safety checking\n              circuit to be exercised. If component checking is required during burner operation for con-\n              stantly fired burners, utilize the self-checking ultra-violet flame scanners (45UV5) with asso-\n              ciated amplifier module (EUVS4) or the infrared flame scanner (48PT2) with associated\n              AutoCheck amplifier (E1R1).\n\n2\n\f                                                                                            \n\n\n\n\nSCANNER SELECTION\n  FIREYE PART NUMBER                                DESCRIPTION                           USE WITH AMPLIFIER   BULLETIN\n 48PT2-1003              Infrared 1/2” straight mount 96” (2438mm) TC-ER cable            E1R1, E1R2 * and     SC-103\n 48PT2-9003              Infrared 1/2” 90angle mount 96” (2438mm) TC-ER cable                E1R3 *\n 48PT2-1007              Infrared 1/2” straight mount 48” (1219mm) TC-ER cable\n 48PT2-9007              Infrared 1/2” 90 angle mount 48” (1219mm) TC-ER cable\n UV1A3                   1\n                           /2” NPT, 36” (915mm) TC-ER cable                                     EUV1           SC-102\n UV1A6                   1\n                           /2” NPT, 72” (1830mm) TC-ER cable\n UV8A                    1/ ” NPT, 72” (1830mm) unshielded leads, 90 right angle mount\n                            2\n                         3\n UV2                       /8” NPT, 36” (915mm) TC-ER cable\n                         3\n UV2A6                     /8” NPT, 72” (1830mm) TC-ER cable\n UV2C                    Replaced with UV2\n 45UV2-1020              1” NPT mount 60 Hz, 72” (1830mm) unshielded leads\n                         3/ ” Sleeve/setscrew mount, 72” (1830mm) unshielded leads\n 45UV3-1050                 4\n UV90-3                  36” (915mm) shielded leads\n UV90-6                  72” (1828mm) shielded leads\n UV90-9                  108” (2742mm) shielded leads\n 69ND1-1000K4            Flame rod 12”, 1/2” NPT mount                                          ERT1           SC-103\n 69ND1-1000K6            Flame rod 18”, 1/2” NPT mount\n 69ND1-1000K8            Flame rod 24”, 1/2” NPT mount\n 45UV5-1007              Self-check UV 1” BSP, 72” (1830mm) unshielded leads, 230 VAC           EUVS4          SC-101\n 45UV5-1008              Self-check UV 1” BSP, 72” (1830mm) unshielded leads, 120 VAC\n 45UV5-1009              Self-check UV 1” NPT, 72” (1830mm) unshielded leads, 120 VAC\n\n\n                       * WARNING: E1R2 and E1R3 are not replacements for E1R1.\n                        Consult factory before installation.\n\n\n                       The flame amplifier module is installed in the third set of guide channels found in the EB700\n                       FLAME-3G-OTH-02815 chassis. It is marked “AMPLIFIER MODULE.” Do not force the module into\n                       position.\n                       Amplifier Module (One Required)\n                       E1R1\n                       E1R2\n                       E1R3\n                       EUV1\n                       EUVS4\n                       ERT1\n\n\n\n\n                       CAUTION: REMOVE POWER FROM THE WIRING BASE BEFORE TRYING TO\n                       REPLACE THE FLAME AMPLIFIER MODULE.\n\n\n\n                                                                                                                          3\n\f                                                                                               \n\n\n\n\nIMPORTANT\n                                                              When wiring to the FLAME-3G-OTH-02815 control wiring\n                                                              base, scanner terminal S2 must be grounded when using\n                                                              a flame rod. When using an infrared scanner (48PT2),\n    Flame Rod\n                                                              ground S2 on all EB700’s labeled “ENG CODE 00.”\n                                                              All other ENG CODE models do not require that S2 be\n                                                              grounded. Do not ground S2 when using ultra violet\n                                                              scanners.\n                                                              Voltage measurements, S1-S2 with no flame present:\n\n\n                                                                AMPLIFIER           S1-S2\n\n                                                                     EUV1          560 VAC\n                                                                    EUVS4\n                                                                    ERT1           270 VAC\n                                                                    E1R1         12 - 15 VDC\n                              TERMINAL WIRING BASE                  E1R2\n                                                                    E1R3\n\n\n                                                              Refer to Service Note SN-100 for recommended\n                                                              grounding techniques.\n\n\n\n\nNOTICE\n                  When Fireye products are combined with equipment manufactured by others and/or integrated into\n                  systems designed or manufactured by others, the Fireye warranty, as stated it its General Terms and\n                  Conditions of Sale, pertains only to the Fireye products and not to any other equipment or to the com-\n                  bined system or its overall performance.\n\n\nWARRANTIES\n                  FIREYE guarantees for one year from the date of installation or 18 months from date of manufacture\n                  of its products to replace, or, at its option, to repair any product or part thereof (except lamps, elec-\n                  tronic tubes and photocells) which is found defective in material or workmanship or which otherwise\n                  fails to conform to the description of the product on the face of its sales order. THE FOREGOING\n                  IS IN LIEU OF ALL OTHER WARRANTIES AND FIREYE MAKES NO WARRANTY OF\n                  MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED. Except as\n                  specifically stated in these general terms and conditions of sale, remedies with respect to any product\n                  or part number manufactured or sold by Fireye shall be limited exclusively to the right to replacement\n                  or repair as above provided. In no event shall Fireye be liable for consequential or special damages of\n                  any nature that may arise in connection with such product or part.\n\n\n\n\n                FIREYE ®                                                                                          EAMP1\n                3 Manchester Road…

Technical Documents

No technical documents available for this product.

Request documentation →

Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.

Talk to an engineer

Ask a question

Fireye Products

3G Electric (S) Pte. Ltd. — Singapore

Product Description

Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.

Frequently Asked Questions

What are the Fireye E1R1, EUV1, ERT1, and EUVS4 amplifier modules used for?

These Fireye amplifier modules are used with the Flame-3G-OTH-02815 system to provide flame scanning using AutoCheck infrared scanners, standard ultraviolet scanners, flame rods, and ultraviolet self-check scanners. Each module must be selected based on the scanner type and inserted into the appropriate Flame-3G-OTH-02815 chassis.

What are the specifications of the Fireye E1R1 amplifier module?

The Fireye E1R1 is an AutoCheck infrared amplifier module designed for use with the 48PT2 scanner. It is not for solid fuel applications and provides oil fog rejection. The module is cULus and FM Approved and must be inserted into the Flame-3G-OTH-02815 chassis for operation.

Where to buy Fireye amplifier modules in Singapore?

3G Electric supplies Fireye amplifier modules including the E1R1, EUV1, ERT1, and EUVS4 to customers in Singapore. We source these components and handle logistics, customs clearance, and delivery to your facility. Contact us for availability and lead time on your order.

How do I select the correct Fireye amplifier module for my scanner?

Select the Fireye amplifier module based on your scanner type. For example, the EUV1 works with UV1A, UV8A, 45UV3, and UV90 scanners, while the ERT1 is for the 69ND1 flame rod. The E1R1 is for the 48PT2 infrared scanner. Always refer to Fireye Bulletin E-1101 for proper installation and wiring.

Used in

Common applications for Fireye

Power-plant auxiliary boiler — M-Series II controller with UV flame scanner, programmed for gas/oil switchover and flame-presence monitoring.

Refinery process heater — MP100E programmer module managing multi-stage ignition and flame-out shutdown interlocks on high-pressure burners.

Petrochemical facility thermal oxidizer — MAUV1T UV amplifier module processing scanner signal from high-temperature burner housings with immune-response filtering.

Large-scale industrial oven (metal treating) — M-Series II with remote reset capability and dual-fuel solenoid isolation for operator safety and burner protection.

Cogeneration plant fuel-gas burner — Fireye scanner and modular controller stack integrated into BMS with remote monitoring of flame status and controller fault codes.

Fireye Products

3G Electric supplies Fireye programmer & amplifier modules. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

Browse all Fireye products →Contact our engineers →