Datasheet Content
®
The Right Choice
Commercial Refrigeration Condensate
Evaporator Pans
For condensate applications where no drain is available, choose the
large capacity pan that fits your application. SUPCO commercial
refrigeration condensate evaporator pans are made from top quality
materials for durable, long life.
FEATURES/BENEFITS
• Corrosion resistant 20 gauge stainless steel construction.
• Positive evaporation
• Space saving
• High limit safety and float switch operation
• Warranty-One Year from date of installation.
• UL Recognized - File# SA32471
• For use in non-low flash point refrigerant applications.
®
The Right Choice
APPLICATIONS
• Evaporates defrost and condensation where no drain is available.
• Used in supermarket refrigeration systems and elevators.
• These pans are used for water dissipation ONLY!
DO NOT OPERATE “DRY”.
• Clean the pan and check the float every 30 days for
optimum performance and operation.
Product Specifications
SUPCO ® NO. CAPACITY VOLTS WATTS AMPS DIMENSIONS L x W X H DISSIPATION RATE PER DAY
CP801 1.75 QT 120 400 3.3 10 x 7 x 2 1/2 3.5 Gallon
CP802 2.5 QT 120 800 6.6 13 x 7 x 2 1/2 6 Gallon
CP802-240 2.5 QT 240 800 3.3 13 x 7 x 2 1/2 6 Gallon
CP804 4.5 QT 120 1000 8.34 13 x 7 x 4
CP804-240 4.5 QT 240 1000 4.17 13 x 7 x 4
CP804HD 7.5 QT 120 1000 8.34 13 x 10 x 4 8 Gallon
CP804HD-240 7.5 QT 240 1000 4.17 13 x 10 x 4 8 Gallon
CP807 7.5 QT 120 1000 8.34 13 x 10 x 4 8 Gallon
CP807-240 7.5 QT 240 1000 4.17 13 x 10 x 4 8 Gallon
CP808 15 QT 120 1000 8.33 21 x 13 x 4 8 Gallon
CP815 15 QT 120 1440 12 21 x 13 x 4 12 Gallon
CP815-240 15 QT 240 1500 6.28 21 x 13 x 4 12 Gallon
CP816 7 QT 4.17 13 x 10 x 4 4.5 Gallon
CP817 7 QT 4.81 13 x 10 x 4 8 Gallon
CP818 7 QT 4.81 13 x 10 x 4 8 Gallon
CP819 7 QT 12.5 13 x 10 x 4 12 Gallon
CP820 7 QT 7.21 13 x 10 x 4 12 Gallon
CP821 15 QT 7.21 21 x 13 x 4 12 Gallon
Cross Reference Replacement Parts
SUPCO ®NO. ®
FISHER EVAPOWAY P/N BIRMINGHAM SUPCO ®P/N FLOAT P/N HEATER P/N MICROSWITCH P/N THERMOSTAT P/N
CP801 DM04T-1S 840111 CP801 CPFLOAT CPH801 CPS800 CPT800
CP802 DM08S-1S 880111 CP802 CPFLOAT CPH802 CPS800 CPT800
CP804 DM10M-1S 810134 CP802-240 CPFLOAT CPH802-240 CPS800 CPT800
CP804-240 DM10M-3S *** CP804 CPFLOAT4 CPH8047 CPS800 CPT800
CP804HD DM10W-1D 810114 CP804-240 CPFLOAT4 CPH804-240 CPS800 CPT800
CP804HD-240 DM10W-3D *** CP804HD CPFLOAT4 CPH804HD CPS800 CPT800
CP807 DM10W-1S *** CP804HD-240 CPFLOAT4 CPH804HD-240 CPS800 CPT800
CP807-240 DM10W-3S 810244 CP807 CPFLOAT4 CPH8047 CPS800 CPT800
CP808 DM10WW-1D *** CP807-240 CPFLOAT4 CPH807-240 CPS800 CPT800
CP815 DM15WW-1D 815134 CP808 CPFLOAT4 CPH808 CPS800 CPT800
CP815-240 DM15WW-3D 815244 CP815 CPFLOAT4 CPH815 CPS800 CPT800
CP816 DM05W-1D 850114 CP815-240 CPFLOAT4 CPH815-240 CPS800 CPT800
CP817 DM10W-2D 810214 CP816 CPFLOAT4 CPH816 CPS800 CPT800
CP818 DM10W-2S *** CP817 CPFLOAT4 CPH817 CPS800 CPT800
CP819 DM15W-1D 815114 CP818 CPFLOAT4 CPH818 CPS800 CPT800
CP820 DM15W-2D 815214 CP819 CPFLOAT4 CPH819 CPS800 CPT800
CP821 DM15WW-2D 815234 CP820 CPFLOAT4 CPH820 CPS800 CPT800
CP821 CPFLOAT4 CPH821 CPS800 CPT800
PRECAUTIONS FOR THE PROPER USE OF
CONDENSATE DRAINS
All condensate drains are fully warranteed for material and workmanship. Each unit is fully
tested prior to leaving our plant. In the event you find that this unit does not perform satisfac-
torily after installation, it should be returned prepaid to our factory. A credit or replacement
can only be issued after our technicians inspect the unit to determine cause of complaint. The
warranty will be void if it is determined the unit was damaged due to improper installation,
physical damage or alteration.
CAUTION: Do not remove enclosure covers or tamper with any components. Over a four-
hour period your refrigerator will dump a quantity of defrost water. The dump should not ex-
ceed the evaporator capacity. The following listing serves as a guide to determine the proper
model for your specific installation:
Part No. Voltage Evaporation Capacity Watts Size Body
Rate In Inches Type
30-OS 220 8 Oz/Hr 32 Oz. 160 10 x 4 x 2 7/8 Cast Aluminum
31 220 6 Oz/Hr 50 Oz. 160 10 x 4 1/2 x 3 3/8 Cast Aluminum
75 220 14 Oz/Hr 75 Oz. 320 10 x 9 x 2 3/4 Cast Aluminum
Use a seperate electrical line connected to a fuse block or circuit breaker of proper capacity.
Voltage drops will decrease operating efficiency and voltage surges will damage heating ele-
ments. Each unit is stamped with voltage rating.
All units must be grounded.
All units should be installed in adequately ventilated compartments
to allow moisture laden air to be carried off.
DO NOT REST UNITS ON WOOD SURFACE OR NEAR ANY FLAMMABLE MATERIAL.
ENCLOSED SPRINGS SHOULD BE INSTALLED AS LEGS.
Do not allow units to lie on wet surfaces. Clean pan regularly for maximum efficiency.
The condensate evaporator drain should be electrically installed with a pull out type plug so
that it can be easily removed from the compressor compartment for cleaning.
WIRING SCHEMATIC
Line
Line
Line
Element
Element
Ground
Line Ground
(Green)
C € DECLARATION OF CONFORMITY
NAME OF APPARATUS: Condensate Drain Pans
MODEL NUMBER: 30-220. 31-220, 70-220, 75-220, CP801, CP802(240),
CP804(240), CP804HD(240), CP807(240), CP808, CP815(240), CP816, CP817,
CP818, CP819, CP820, CP821
DESCRIPTION OF APPARATUS: Condensate Drein Pans
Sealed Unit Parts Co., Inc. declares that the above model is in
conformity to the following harmonized standards and directives:
Directive 2006/95/EC
Normative standard SPECIBICATIONS TO WHICH CONFORMITY IS LEVEL
EN 61326-1: 2006 DECLARED
EN 61000-4-2: 2008 2,4,6,abd 8 kV Air Discharge
Electrostatic Discharge 2,4, and 6 kV Contact Discharge
Test
EN 61000-4-3: 2008 4.5 V/M Minimum (4.5 vV/M test A
Radiated Susceptibility 900 MHz Cell Phone, 200 Hz, 100% AM
Test
EN 55011/EN55022 CISPR 16-2-3
Radiated Emission
Manufacturer:
Sealed Unit Parts Co.
P.O. Box 21
Allenwood, NJ 08720
USA
Manufacturer’s Signature:
wae
Alexander Brodetsky Ph.D Date: 2/15/2017
sr.Vice President, Engineering
