FBR FGP 50/2 TL EVO 3 SI

LIGHT-OIL BURNERS TWO STAGES SK070002_E_en STAGES ฀TWO BURNERS ฀ LIGHT-OIL ฀ FGP 50/2 EVO-3 Burners for light-oil two stages. They ฀฀are฀ composed by:฀fan฀at฀high฀pressurisation฀and฀reverse฀blades,฀combustion฀ head฀with฀adjustment฀at฀high฀ efficiency฀฀and฀ high฀flame฀stability฀and฀hydraulic฀system฀of฀regulation฀combustive฀air฀on฀the฀two฀stages฀of฀flame.฀ Compact฀฀ overall฀dimensions฀and฀disposition฀rationalized฀of฀the฀components฀with฀accessibility฀facilitated฀for฀the฀ operations฀฀of฀setting฀and฀maintenance. Complete฀of฀nozzles,฀flexible hoses and฀line฀filter. Complete฀ of฀flange฀and฀gasket฀for฀installation฀on฀generator. Fig. 1 FGP 50/2 EVO-3 FGP 50/2 EVO-3  LIGHT-OIL BURNERS TWO STAGES SK070002_E_en TECHNICAL฀DATA฀ FGP 50/2 EVO-3 MODEL FGP 50/2 EVO-3 Flow min. 1°st. / min. 2°st. - max. 2°st. * [kg/h] 9.9/20-53.1 Thermal power min. 1°st. / min. 2°st. - [Mcal/h] 100.1/204-541.8 max. 2°st. * Thermal power min. 1°st. / min. 2°st. - [kW] 117.4/237-630 max. 2°st. * Fuel: LIGHT-OIL 1.5°E at 20°C = 6.2 cSt = 35 sec Redwood N°1 Intermitted working operation (min. 1 stop every 24 hours) two stages Environmental conditions operation / storage: -15...+40°C / -20...+70°C, rel. humidity max. 80% Max. temperature combustion air [°C] 60 Nominal electric power [kW] 1.1 Fan motor [kW] 0.74 Nominal motor current absorption [A] 1.8 Nominal auxiliary absorption [A] 0.3 Power supply: 3~400V, 1N~230V - 50Hz Electric protection degree: IP 40 Noisiness฀**฀min-max [dBA] 71-73 Burner฀weight฀*** [kg] 31 *฀Reference฀conditions:฀Environment฀฀temperature ฀20°C฀-฀Barometric฀pressure฀1013฀mbars฀-฀0 (zero) Height meters above mean sea level. **฀Sound power level detected at a distance of 1 meter in the combustion lab with burner working on boiler (UNI EN ISO 3746). ***฀For฀burner฀FGP 50/2 EVO-3 long฀head฀add฀1฀kg฀to฀the฀weight. OPERATING RANGE DIAGRAM FGP 50/2 EVO-3 [mbar] 12 10 8 6 4 2 0 0 100 200 300 400 500 600 700 [kW] Fig. 2 X฀=฀Thermal฀power฀Y฀=฀Pression฀in฀the฀combustion฀chamber The฀firing฀rates฀has฀been฀obtained฀based฀on฀test฀boilers฀in฀accordance฀with฀EN267฀standards฀and฀are฀indicative฀of฀matching฀the฀burner฀to฀the฀boiler.฀ For฀the฀correct฀operation฀of฀the฀burner,฀combustion฀chamber฀dimensions฀must฀be฀in฀accordance฀with฀current฀regulation.฀In฀case฀of฀non-compliance,฀ contact฀the฀manufacturer. FGP 50/2 EVO-3  LIGHT-OIL BURNERS TWO STAGES SK070002_E_en DIMENSIONS [MM] O F P C 20 E TC - TL A B D Fig. 3 Dimensions฀FGP 50/2 EVO-3 MODEL A B C D E F O P FGP 50/2 EVO-3 187 314 150 558 417 100 207 200 * see "flame tube length" FGP 50/2 EVO-3  LIGHT-OIL BURNERS TWO STAGES SK070002_E_en BOILER PLATE * Suggested dimension of connection between burner and generator. Fig. 4 Boiler฀plate MODEL L min L max M N min N* N max FGP 50/2 EVO-3 mm 205 226 M10 160 160 180 FLAME TUBE LENGTH Flame tube length must be selected based on the specifications supplied by boiler manufacturer and, in any case, it must be greater than the thickness of the boiler door included its insulation. In case of boilers with flame inversion or front flue combustion chambers, it is necessary to insulate the area between the flame tube and front door with refractory material. This protection material must not impede flame tube extraction. MODEL TC TL ** FGP 50/2 EVO-3 mm 250 335 ** For different flame lengths, please contact our Technical-Sales Department. FGP 50/2 EVO-3  LIGHT-OIL BURNERS TWO STAGES SK070002_E_en BURNER SIGNAL DESCRIPTION In the picture below there are indicated all the signalation present on the burner: 2 1 Fig. 5 Burner฀signal฀description LEGEND 1) ON/OFF฀button 2) Reset฀from฀lockout฀button฀+฀status฀lamp The multicolor signal lamp in the lockout reset button (pos.2) is the key indicating element for visual diagnostics and interface diagnostics. In normal operation, the different operating states are indicated in the form of color codes; please refer to electrical device handbook supplied with the present instructions. After a non-alterable lockout, the red signal lamp in the lockout reset button (pos.2) lights up. By pressing the lockout reset button (pos.2) for more than 3 seconds, the visual diagnostics of the cause of fault can be activated; please refer to electrical device handbook supplied with the present instructions. For close the diagnostics mode and for switch on the burner again, it is necessary to reset the burner control. Press the lockout reset button (pos.2) for about 1 second (<3 seconds). After a non-alterable lockout, the red signal lamp in the lockout reset button (pos.2) lights up. For reset the control box press the lockout reset button (pos.2) for about 1 second (<3 seconds). FGP 50/2 EVO-3  LIGHT-OIL BURNERS TWO STAGES SK070002_E_en PRODUCT SPECIFICATION SHORT DESCRIPTION Light-oil burners two stages. DETAILED SPECIFICATION Light-oil burner two stages composed by: • Fan฀at฀high฀pressurisation฀and฀reverse฀blades; • Combustion฀head฀with฀adjustment฀at฀high฀performance฀and฀elevated฀flame฀stability; • Flange฀and฀insulating฀gasket฀for฀fixing฀at฀boiler; • Three-phase฀power฀supply; • Photoresistance฀for฀flame฀detection; • IP฀40฀electric฀protection฀level; • Easy฀extraction฀of฀combustion฀head฀without฀get฀off฀the฀burners฀by฀bolier. CONFORMING TO: • CE฀rules; • 2014/30/UE฀Directive฀E.M.C.; • 2014/35/UE฀Directive฀L.V.; • 2006/42/CE฀Directive฀M.D.; • 2014/68/UE฀(ART.4,PAR.3)฀Directive฀P.E.D.; • Reference฀rules:฀EN267฀(liquid฀fuel)฀-฀EN746-2฀(industrial฀thermoprocessing฀equipment). STANDARD EQUIPMENT • Flexible hoses for connection; • Line filter; • Isomart gasket; • Nozzles; • Flange with insulating gasket; • Burner nameplate; • Warranty; • Instruction handbook for installation, use and maintenance. OPTIONAL • Noise฀protection. The฀illustrations฀and฀data฀here฀shown฀are฀indicative.฀F.B.R.฀Bruciatori฀S.r.l.฀reserves฀the฀right฀to฀bring,฀without฀any฀obligation฀of฀warning,฀any฀changes฀that฀would฀be฀appropriate฀to฀the฀continuing฀development฀of฀their฀products. FGP 50/2 EVO-3