build

Welding

Welding equipment & consumables — MIG/TIG/stick machines, electrodes, wire, PPE and accessories for fabrication and maintenance.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 89 of 501

Low-alloy steel TIG welding rod for 5% chromium-molybdenum steels. Used in high-temperature service applications such as boiler tubes, pressure vessels, and piping. Yield strength 80 ksi, tensile strength 93 ksi as welded.

ESAB

ESAB TIGROD ER80S-B6 TIG Welding Rod, 1/16 in x 36 in, 10 lb

BrandESAB

Sign inAvailable

Replacement self-cleaning filter for Miller Filtair SWX-S fume extractors. MERV 15 rated for capturing welding fumes and airborne particulates in mobile and wall-mount industrial extraction systems.

MILLER ELECTRIC

MILLER ELECTRIC Filtair SWX-S Self-Cleaning Filter MERV 15

BrandMILLER ELECTRIC

Sign inAvailable

The Cutmaster 82 is a plasma cutting system with an 80 A output, designed for manual cutting of conductive metals. It operates on a nominal input voltage of 240V and requires a minimum input air flow rate of 6.7 cfm. The unit includes a 20 ft handheld torch for flexibility in workshops and job sites.

THERMAL DYNAMICS

THERMAL DYNAMICS Cutmaster 82 Plasma Cutter, 80 A, 20 ft Handheld Torch, 240V

BrandTHERMAL DYNAMICS

Sign inAvailable

Consumable tip for Miller ICE-60T handheld plasma torch, rated at 60 A. Directs the plasma stream and focuses the arc for cutting conductive metals. OEM replacement part.

MILLER ELECTRIC

MILLER ELECTRIC Tip for ICE-60T Torch, 60 A

BrandMILLER ELECTRIC

Sign inAvailable

MIG gun rated at 100 A for 0.035 in wire diameter with a 10 ft cable. Features M-Series contact tips and a Hobart-compatible rear connection. Used for semi-automatic gas metal arc welding (GMAW/MIG) in light fabrication, repair, and maintenance tasks.

HOBART MIG

HOBART MIG Gun HR100, 100 A, 0.035 in, 10 ft, Hobart-Compatible

BrandHOBART MIG

Sign inAvailable

This copper alloy collet is designed for use in stud welding applications, holding and guiding studs during the welding process. It accommodates 1/4 in diameter studs with lengths from 1/4 in to 2 1/2 in. Suitable for industrial fabrication and construction where Nelson-style stud welding equipment is employed.

NELSON STUD WELDING INC.

NELSON STUD WELDING INC. NELSON STUD WELDING INC

BrandNELSON STUD WELDING INC.

Sign inAvailable

Two-stage regulator for air and inert gases. Inlet connection: CGA 580. Outlet connection: 7/8"-14 M LH. Stainless steel diaphragm. Used in welding, cutting, and laboratory gas systems for stable pressure reduction from cylinder to working pressure.

VICTOR

VICTOR Air & Inert Gas Regulator

BrandVICTOR

Sign inAvailable

T-handle clamp for holding workpieces during vertical welding operations. Used in metal fabrication and structural assembly for stable positioning.

FLEXTUR

FLEXTUR T-Handle Clamp 78908120

BrandFLEXTUR

Sign inAvailable

The Deltaweld 500 is a power source for MIG welding, operating on a nominal input voltage of 460V. It supports a maximum wire diameter of 0.045 inches for flux-cored welding. This unit is suited for industrial fabrication, heavy equipment repair, and structural steel work in high-duty-cycle production environments.

MILLER ELECTRIC MIG

MILLER ELECTRIC MIG Deltaweld 500 Power Source Only, 460V, 0.045 in Max Wire

BrandMILLER ELECTRIC MIG

Sign inAvailable

HAKKO

HAKKO T39-IL02 Conical Soldering Tip, 0.2 mm Width, 12.5 mm Length

BrandHAKKO

Sign inAvailable

← Prev 1…87 88 89 90 91…501 Next →