water_drop

Water Treatment & Utilities

Source water treatment & utilities equipment worldwide. 49,916 products from 12 brands incl. pumps, valves & controls. Buy in stock at 3G Electric.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 2922 of 4992

This ASME Section XIII hot water pressure relief valve features a 1 1/2 in x 2 in FNPTF x FNPTF iron body. It is rated for a maximum operating pressure of 75 psi. Used in commercial and industrial hot water systems to protect boilers, water heaters, and storage tanks from overpressure.

Watts

Watts ASME Section XIII Hot Water Pressure Relief Valve

BrandWatts

Sign inAvailable

This engine-driven centrifugal pump features a 6 hp recoil-start engine and a ductile iron volute. It has 3 in NPT inlet and outlet ports and can handle solids up to 3/4 in diameter. Suitable for dewatering, irrigation, and general water transfer applications.

OEM

OEM APPROVED VENDOR 6 hp Engine-Driven Centrifugal Water Pump

BrandOEM

Sign inAvailable

This manual two-way ball valve features a CPVC straight body with socket x FNPT connections and a lever handle for flow control. Suitable for use in CPVC piping systems where corrosion resistance is required, such as in water treatment and chemical processing applications.

GF PIPING SYSTEMS

GF PIPING SYSTEMS 1 1/2 in CPVC Straight Two-Piece Ball Valve

BrandGF PIPING SYSTEMS

Sign inAvailable

Double-valve DIN Form A solenoid connector cordset with two female right-angle connectors and bare wire terminations. Features 3 m black PVC cable, 18 AWG wire, and 300 mm DIN connector spacing. Rated IP67 for dust and water ingress protection. Used for connecting solenoid valves in industrial automation, pneumatic, and hydraulic systems.

MURRELEKTRONIK

MURRELEKTRONIK Double-Valve DIN Form A Solenoid Connector Cordset

BrandMURRELEKTRONIK

Sign inAvailable

Green snap-on pipe marker with white legend reading 'Process Water' and directional arrows. Fits pipe outer diameters of 4 to 6 inches. Used to identify process water lines in industrial piping systems.

BRADY

BRADY Process Water Snap-On Pipe Marker

BrandBRADY

Sign inAvailable

This hose assembly features a vinyl nitrile tube and cover with wire helix reinforcement for suction and discharge of water. Rated for 300 psi and a temperature range of -20° to 180°F. Suitable for dewatering, irrigation, and general fluid transfer in industrial and construction settings.

BOSTON

BOSTON Vinyl Nitrile Water Suction & Discharge Hose Assembly

BrandBOSTON

Sign inAvailable

This stationary electric hydraulic pump unit delivers a maximum operating pressure of 10,000 psi and a maximum flow rate of 40 cu in/min, powered by a 1 hp motor. Its Tandem Center design enables dual-circuit operation for powering hydraulic cylinders, presses, and lifting equipment in industrial settings.

ENERPAC

ENERPAC ZE3320SB Corded High-Power Stationary Electric Hydraulic Pump Unit

BrandENERPAC

Sign inAvailable

This low-lead brass rigid barbed hose fitting connects 5/16 in hose I.D. to NPT threaded ports. It features a male x female gender and hex nipple grip type. Suitable for air, water, and chemical lines in industrial applications such as pneumatics, hydraulics, and instrumentation.

OEM

OEM Low-Lead Brass Rigid Barbed Hose Fitting

BrandOEM

Sign inAvailable

HAYWARD

HAYWARD BYV11100A0NGI00 PVC General-Service Butterfly Valve

BrandHAYWARD

Sign inAvailable

This 4-inch NPT threaded square drive cored plug is made from C89833 brass with PTFE and rated Class 125. It is designed for sealing low-pressure pipe fittings in potable water systems. Maximum operating pressure is 125 psi at 72° F.

OEM

OEM APPROVED VENDOR 4 in NPT Threaded Square Drive Cored Plug

BrandOEM

Sign inAvailable

← Prev 1…2920 2921 2922 2923 2924…4992 Next →

Top brands in Water Treatment & Utilities

Manufacturers serving this application.

Water Treatment & Utilities

Watts ASME Section XIII Hot Water Pressure Relief Valve

OEM APPROVED VENDOR 6 hp Engine-Driven Centrifugal Water Pump

GF PIPING SYSTEMS 1 1/2 in CPVC Straight Two-Piece Ball Valve

MURRELEKTRONIK Double-Valve DIN Form A Solenoid Connector Cordset

BRADY Process Water Snap-On Pipe Marker

BOSTON Vinyl Nitrile Water Suction & Discharge Hose Assembly

ENERPAC ZE3320SB Corded High-Power Stationary Electric Hydraulic Pump Unit

OEM Low-Lead Brass Rigid Barbed Hose Fitting

HAYWARD BYV11100A0NGI00 PVC General-Service Butterfly Valve

OEM APPROVED VENDOR 4 in NPT Threaded Square Drive Cored Plug

Top brands in Water Treatment & Utilities

Guides & Resources