water_drop

Water Treatment & Utilities

Source water treatment & utilities equipment worldwide. 49,916 products from 12 brands incl. pumps, valves & controls. Buy in stock at 3G Electric.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 2744 of 4992

This melt blown water filter cartridge is constructed of polypropylene media for sediment filtration. Rated at 20 microns, it provides a flow rate of 5 gpm and has an overall height of 10 inches. Suitable for use in standard 10-inch filter housings in residential, commercial, and industrial water treatment systems.

OEM

OEM APPROVED VENDOR Melt Blown Water Filter Cartridge

BrandOEM

Sign inAvailable

This CPVC ball valve features a straight, one-piece body with a Tee handle for manual two-way flow control. Rated for a maximum working pressure of 235 psi (CWP), it is suitable for on/off service in industrial piping systems handling water, chemicals, or corrosive fluids.

SPEARS

SPEARS 2 in CPVC Straight One-Piece Tee Ball Valve 235 psi CWP 2131-020C

BrandSPEARS

Sign inAvailable

Bronze Z-body globe valve with rising stem and female threaded ends. For general service on gas, oil, steam, and water media. Used in industrial piping systems for throttling or regulating flow.

MILWAUKEE VALVE

MILWAUKEE VALVE 502-1/4 Bronze Straight-Body Globe Valve, 1/4 in, Female

BrandMILWAUKEE VALVE

Sign inAvailable

This PVC angle-body ball valve features a full-port ball port for minimal pressure drop. With 1/4 in MNPT male thread x push-to-connect ends, it enables quick installation in tight spaces. Suitable for on/off flow control in low-pressure fluid systems handling water, chemicals, or air.

OEM

OEM APPROVED VENDOR Manual Two-Way Ball Valve: 1/4 in

BrandOEM

Sign inAvailable

Gray watertight pin and sleeve receptacle rated for 250V DC/600V AC, single phase, 30 A, with 3 poles and 2 wires. Suitable for industrial environments requiring a reliable single-phase power connection with protection against dust and moisture.

HUBBELL

HUBBELL VR332 Watertight Receptacle, 3 Pole, 2 Wire, 30 A, 250V DC/600V AC

BrandHUBBELL

Sign inAvailable

This pedestal-mount rotary gear pump features a stainless steel body and 1/2" FNPT ports, delivering 2.6 gpm. It is designed for transferring clean, non-abrasive fluids in industrial applications such as lubrication, hydraulic systems, and chemical processing. The pump does not include a relief valve.

OBERDORFER

OBERDORFER Pedestal-Mount Rotary Gear Pump

BrandOBERDORFER

Sign inAvailable

Compact solenoid-driven diaphragm metering pump with PVC head and PTFE diaphragm. Operates at 115V AC with a maximum flow rate of 60 gpd and reproducibility of ±1.0%. Features ceramic check ball, PVDF fittings, and PVDF/Polyprel seals. Suitable for precise chemical dosing in water treatment and industrial processing applications.

LMI PUMPS

LMI PUMPS Compact Solenoid-Driven Diaphragm Metering Pump

BrandLMI PUMPS

Sign inAvailable

Triplex piston pump with hollow shaft and horizontal hydraulic drive flange. Oil-bath lubrication. Maximum flow rate 4 gpm at 1,450 RPM. Intake 1/2 in FNPT, discharge 3/8 in NPT. For pressure washing systems powered by a hydraulic source.

A.R. NORTH AMERICA

A.R. NORTH AMERICA HYD-RK1520-PKG Hydraulic-Drive Pressure Washer Pump

BrandA.R. NORTH AMERICA

Sign inAvailable

This ductile iron butterfly valve is designed for fire-protection systems handling water. It features a clamp-type connection and a gear-operated handwheel for precise flow control. Rated for a maximum pressure of 300 psi (CWP), it is suitable for 2 1/2 in pipe systems in commercial and industrial applications.

GRUVLOK

GRUVLOK Ductile Iron Fire-Protection Butterfly Valve

BrandGRUVLOK

Sign inAvailable

This manual two-way ball valve features a 1 1/2 in PVC body with straight pattern and Class 150 flange connections. It includes a Locking Tee handle for secure operation. Suitable for on/off flow control in corrosive fluid handling, water treatment, chemical processing, and industrial piping systems.

HAYWARD FLOW CONTROL

HAYWARD FLOW CONTROL Manual Two-Way Ball Valve: 1 1/2 in

BrandHAYWARD FLOW CONTROL

Sign inAvailable

← Prev 1…2742 2743 2744 2745 2746…4992 Next →

Top brands in Water Treatment & Utilities

Manufacturers serving this application.

Water Treatment & Utilities

OEM APPROVED VENDOR Melt Blown Water Filter Cartridge

SPEARS 2 in CPVC Straight One-Piece Tee Ball Valve 235 psi CWP 2131-020C

MILWAUKEE VALVE 502-1/4 Bronze Straight-Body Globe Valve, 1/4 in, Female

OEM APPROVED VENDOR Manual Two-Way Ball Valve: 1/4 in

HUBBELL VR332 Watertight Receptacle, 3 Pole, 2 Wire, 30 A, 250V DC/600V AC

OBERDORFER Pedestal-Mount Rotary Gear Pump

LMI PUMPS Compact Solenoid-Driven Diaphragm Metering Pump

A.R. NORTH AMERICA HYD-RK1520-PKG Hydraulic-Drive Pressure Washer Pump

GRUVLOK Ductile Iron Fire-Protection Butterfly Valve

HAYWARD FLOW CONTROL Manual Two-Way Ball Valve: 1 1/2 in

Top brands in Water Treatment & Utilities

Guides & Resources