settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 865 of 4547

Metric, round, clamp-on aluminum shaft collar with 36 mm bore diameter and 15 mm collar width. Used to position, secure, or limit components on a shaft in industrial machinery. Suitable for applications requiring lightweight, corrosion-resistant positioning.

RULAND MANUFACTURING

RULAND MANUFACTURING MSP-36-A Aluminum Shaft Collar, 36 mm Bore, 15 mm Width

BrandRULAND MANUFACTURING

Sign inAvailable

This taper lock bushing features an 8° taper with a 48 mm bore diameter, 1.25 in overall length, and 2.75 in overall diameter. It is used for mounting pulleys, sprockets, or couplings onto shafts in power transmission systems, providing a secure, keyless connection.

OEM

OEM Taper Lock Bushing, 8° Taper, 48 mm Bore, 1.25 in Length, 2.75 in OD

BrandOEM

Sign inAvailable

Cast iron close-coupled flange with a 4-inch outside diameter and finished bore. Rated for maximum speed of 6,000 RPM. Used in power transmission systems to connect shafts in pumps, gearboxes, and industrial machinery.

TB WOODS

TB WOODS TB WOOD'S Finished Bore Close-Coupled Flange, 6S118

BrandTB WOODS

Sign inAvailable

This washdown flange-mount ball bearing features a 1 7/16 in cylindrical bore and a PBT plastic housing with H-1 grease lubricant. It uses set screws for shaft mounting and a 1/2 in mounting bolt. Designed for applications requiring frequent washdown and sanitation.

IPTCI BEARINGS

IPTCI BEARINGS SUCTFL207-23 IP69K Washdown Flange-Mount Ball Bearing

BrandIPTCI BEARINGS

Sign inAvailable

Single-pitch chain guide for #40 roller chain. Black UHMWPE guide material reduces friction and wear. Stainless steel non-flanged frame provides corrosion resistance. Used to guide and support chain in conveying and power transmission applications.

MJ MAY

MJ MAY Type CKG Chain Guide with Type C Non-Flanged Frame

BrandMJ MAY

Sign inAvailable

One-piece rigid shaft coupling with round body, designed to connect two shafts with bore diameters of 1 1/2 in and 1 in. Suitable for inch-based power transmission systems requiring precise alignment and zero backlash. Commonly used in industrial machinery, conveyors, and pumps.

CLIMAX METAL PRODUCTS

CLIMAX METAL PRODUCTS One-Piece Rigid Shaft Coupling

BrandCLIMAX METAL PRODUCTS

Sign inAvailable

This straight bevel gear transmits motion and power between intersecting shafts at a 90-degree angle. It features a gear ratio of 2, module m 1, 20 teeth, a 6 mm bore diameter, and is made of nylon. Suitable for light-duty drives, conveyors, and packaging machinery where quiet operation and corrosion resistance are required.

KHK GEARS

KHK GEARS PB1-2040 Straight Teeth Metric Bevel Gear

BrandKHK GEARS

Sign inAvailable

This 2-piece, round, clamp-on shaft collar is made from 303 stainless steel with a 2 7/8 in bore diameter. It is designed for balanced shaft applications in high-speed rotating machinery, providing precise clamping and reduced vibration. Typical uses include securing components on shafts in precision equipment where balance is critical.

RULAND MANUFACTURING

RULAND MANUFACTURING SPB-46-SS Stainless Steel Balanced Shaft Collar

BrandRULAND MANUFACTURING

Sign inAvailable

This general purpose multi-layered sleeve bearing features a steel backing with a PTFE liner for low-friction, self-lubricating operation. It has a 1 in bore, 1 1/8 in OD, and 3/8 in length, with an operating temperature range of -320°F to 530°F. Suitable for supporting rotating or oscillating shafts in industrial equipment such as conveyors, packaging machinery, and material handling systems.

OEM

OEM General Purpose Multi-Layered Sleeve Bearing

BrandOEM

Sign inAvailable

This high-precision clamp-on beam shaft coupling accommodates up to 3° angular misalignment. It features a round body with a 1/2 in bore on one side and an 11 mm bore on the other, enabling inch-to-metric shaft connections. Typical applications include motion control systems requiring accurate shaft alignment.

RULAND MANUFACTURING

RULAND MANUFACTURING High-Precision Clamp-On Beam Shaft Coupling

BrandRULAND MANUFACTURING

Sign inAvailable

← Prev 1…863 864 865 866 867…4547 Next →