settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 498 of 4547

Inch aluminum hub for zero-backlash curved jaw couplings. Outside diameter 2 1/4 in. Used to connect rotating shafts in motion-control systems, compensating for misalignment while transmitting torque.

RULAND MANUFACTURING

RULAND MANUFACTURING Zero-Backlash Curved Jaw Coupling Hub, JS36-18-A

BrandRULAND MANUFACTURING

Sign inAvailable

Inch-system tapered roller bearing cone with 9 in bore, 11.1 in OD, and 1.25 in cone width. Features a carbon steel ring and chrome steel cage. Designed for use with cup 544118 to support combined radial and axial loads in industrial machinery and equipment.

NTN

NTN 544090 Tapered Roller Bearing Cone

BrandNTN

Sign inAvailable

Split taper bushing with 5/8 in bore diameter, 3 in overall diameter, and 2.44 in bolt circle diameter. Taper is 3/4 in per foot. Used to mount pulleys, sprockets, and couplings onto shafts in power transmission systems.

POWER DRIVE

POWER DRIVE Split Taper Bushing, P1 X 5/8

BrandPOWER DRIVE

Sign inAvailable

This general purpose multi-layered sleeve bearing features a PTFE-lined steel construction for low-friction, self-lubricating operation. With a 3 1/4 in bore, 3 7/16 in OD, and 5 in length, it is suited for supporting shafts in rotating equipment such as pumps, conveyors, and fans under moderate loads and low-to-medium speeds.

OEM

OEM APPROVED VENDOR General Purpose Multi-Layered Sleeve Bearing

BrandOEM

Sign inAvailable

This double disc coupling connects two rotating shafts while compensating for misalignment. It features a 35 mm x 30 mm bore with keyway, 79.4 mm OD, and clamp-on design. The hubs are aluminum, the discs are stainless steel, and the two-piece assembly includes a center spacer. Suitable for motion control applications such as servo motors and linear actuators.

RULAND MANUFACTURING

RULAND MANUFACTURING Double Disc Coupling for Keyed Shafts

BrandRULAND MANUFACTURING

Sign inAvailable

This curvilinear HTD section timing belt from the Conti® Hawk PD series features a 20 mm pitch and 340 mm top width. Designed for synchronous power transmission, it is suited for applications requiring precise positioning and high torque capacity, such as conveyors and packaging equipment.

CONTINENTAL

CONTINENTAL Conti® Hawk PD HTD Timing Belt, 20 mm Pitch, 340 mm Top Width

BrandCONTINENTAL

Sign inAvailable

This one-piece clamp-on shaft collar is made from 303 stainless steel and features an 11/16 inch bore diameter for inch-size shafts. It is used to position and secure components on shafts in industrial machinery, conveyors, and automation equipment.

RULAND MANUFACTURING

RULAND MANUFACTURING CL-11-SS Stainless Steel Shaft Collar

BrandRULAND MANUFACTURING

Sign inAvailable

This reinforced solid-core smooth round belt is made from neoprene with a hardness of 80A. It has a diameter of 9/16 in and an overall length of 237 in, designed for a minimum pulley diameter of 5 13/32 in. Suitable for power transmission and conveying applications requiring a flexible, smooth belt.

GATES

GATES 9 X 233 PR Reinforced Solid-Core Smooth Round Belt

BrandGATES

Sign inAvailable

This clamp-on Oldham coupling hub is designed for keyed shafts, accommodating 0.2 mm axial motion. It is used in motion control applications to transmit torque while allowing for angular misalignment, protecting connected equipment from misalignment-induced wear.

RULAND MANUFACTURING

RULAND MANUFACTURING Clamp-On Oldham Coupling Hub for Keyed Shafts

BrandRULAND MANUFACTURING

Sign inAvailable

GATES

GATES PowerGrip HTD Timing Belt 330-5M-09

BrandGATES

Sign inAvailable

← Prev 1…496 497 498 499 500…4547 Next →