settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 45 of 4547

This needle bearing idler sprocket with hub is designed for 60 chain size and features 17 teeth with a 4.46-inch outside diameter. Constructed from steel, it incorporates a needle roller bearing and an inch bore system. Used to guide and tension roller chain in power transmission applications such as conveyors and material handling equipment.

BREWER MACHINE & GEAR

BREWER MACHINE & GEAR D60B17F Needle Bearing Idler Sprocket with Hub

BrandBREWER MACHINE & GEAR

Sign inAvailable

Two-piece aluminum shaft collar with clamp-on design for secure positioning on shafts. Features a metric body with an inch bore and 15 mm collar width. Used to locate bearings, act as mechanical stops, or mount components in power transmission assemblies.

RULAND MANUFACTURING

RULAND MANUFACTURING MSP-23E-AN Aluminum Shaft Collar

BrandRULAND MANUFACTURING

Sign inAvailable

Steel male threaded fixed rod end with black oxide finish and right-hand threading. Eye thickness of 17 mm and hole center-to-end length of 80 mm. Used to connect threaded rods or clevises to machine components, allowing pivoting motion in one plane in industrial machinery, automation systems, and material handling equipment.

AMPG

AMPG Steel Male Threaded Fixed Rod End

BrandAMPG

Sign inAvailable

Square flange-mount ball bearing with 1 1/2 in cylindrical bore, cast iron housing, and set screw locking. Lubricated with NLGI #3 equivalent grease. Mounting bolt size 1/2 in. Overall length 5 13/32 in. For radial load applications in power transmission systems.

NTN

NTN UCFUX-1.1/2M General Purpose Flange-Mount Ball Bearing

BrandNTN

Sign inAvailable

Double-row angular contact ball bearing with a 30° contact angle, open design, ABEC 3 precision class, and steel cage. Handles combined radial and axial loads in applications such as pumps, compressors, gearboxes, and electric motors requiring high rigidity and moderate speeds. Single bearing, metric system, bearing industry number 3306/5306.

FAG BEARINGS

FAG BEARINGS 3306-BD-XL Double-Row Angular Contact Ball Bearing

BrandFAG BEARINGS

Sign inAvailable

This right angle AC gearmotor features a single output shaft, capacitor-start design, and TEFC enclosure. It delivers 45 RPM with 0.33 hp input and a full load current of 5.6/2.8 A. Suitable for applications requiring low-speed torque in dusty or damp environments.

Dayton

Dayton Right Angle AC Gearmotor

BrandDayton

Sign inAvailable

This steel sprocket is designed for use with 3/8 in pitch roller chain. It has 13 teeth, a 5/8 in fixed bore, and a pitch diameter of 1.567 in. Typical applications include conveyors, packaging machinery, and agricultural equipment requiring a size 35 sprocket.

TRITAN

TRITAN Size 35 Fixed-Bore Roller Chain Sprocket, 13 Teeth, 5/8 in Bore, Steel

BrandTRITAN

Sign inAvailable

This right-angle AC gearmotor features a hollow shaft design for direct mounting on driven shafts, saving space. The permanent split capacitor (PSC) motor with totally enclosed fan-cooled (TEFC) enclosure provides 28 RPM output at 0.2 hp input, with a maximum torque of 360 in-lb and a 60:1 gear ratio. Suitable for low-speed rotary motion in industrial machinery, conveyors, and material handling equipment.

BISON AC

BISON AC Hollow Shaft Right Angle AC Gearmotor

BrandBISON AC

Sign inAvailable

This non-leaded metallic sleeve bearing is made of bronze and features a 3/4 in bore, 7/8 in OD, and 1 1/4 in length. It is rated for operating temperatures from -40°F to 400°F. Commonly used in industrial machinery such as conveyors, pumps, and gearboxes to support rotating shafts and reduce friction.

BUNTING BEARINGS

BUNTING BEARINGS Non-Leaded Metallic Sleeve Bearing

BrandBUNTING BEARINGS

Sign inAvailable

This stainless steel shaft collar features a 2-piece, round, clamp-on design with a 12 mm bore diameter and 11 mm collar width. It is used for positioning, securing, or limiting components on a shaft in industrial machinery such as conveyors and packaging equipment.

RULAND MANUFACTURING

RULAND MANUFACTURING MSP-12-SS Stainless Steel Shaft Collar

BrandRULAND MANUFACTURING

Sign inAvailable

← Prev 1…43 44 45 46 47…4547 Next →