settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 35 of 4547

POWERHOUSE

POWERHOUSE 960-8P-30 GT Section Timing Belt, 8 mm Pitch, 30 mm Width, Nylon

BrandPOWERHOUSE

Sign inAvailable

RULAND MANUFACTURING

RULAND MANUFACTURING Steel Shaft Collar

BrandRULAND MANUFACTURING

Sign inAvailable

This steel male threaded fixed rod end features a black oxide finish and right-hand M30-3.50 threads with a 72 mm thread length. It provides a rigid, non-articulating connection for linear motion or load transfer in industrial machinery, conveying systems, and structural supports.

OEM

OEM Steel Male Threaded Fixed Rod End

BrandOEM

Sign inAvailable

Cast-iron wedge V-belt pulley with a bushed bore and SDS style. Features a 6.9 in outside diameter and 2 grooves, designed for 3V or 3VX belt sections. Used in industrial power transmission systems to transfer rotational force from a motor to driven equipment such as conveyors, pumps, and compressors.

OEM

OEM Bushed-Bore Cast-Iron Wedge V-Belt Pulley

BrandOEM

Sign inAvailable

This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze. It has a 12 mm bore, 18 mm outer diameter, and 8 mm length, with a maximum PV rating of 49,938 lb/sq in-fpm. Suitable for rotating or oscillating shafts in industrial machinery, conveyors, and automotive applications under moderate loads and speeds. Sold in a pack of 10.

OILITE

OILITE SAE 841 Bronze Sleeve Bearing

BrandOILITE

Sign inAvailable

This dual-lip oil seal features a rubber-enclosed case for use in rough bore applications. It is constructed with fluoro material and includes a spring-loaded TC-type design. The seal measures 2.688 in inner diameter, 3.75 in outer diameter, and 0.5 in width. It is commonly used in rotating equipment such as pumps, gearboxes, and motors to retain lubricants and exclude contaminants.

DDS

DDS Dual-Lip Oil Seal with Rubber-Enclosed Case for Rough Bores

BrandDDS

Sign inAvailable

This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze impregnated with SAE 30 oil. It has a 3/4 in bore, 1 in OD, and 1 in length, operating within a temperature range of 10°F to 220°F. Suitable for applications such as conveyors, pumps, and agricultural equipment where moderate loads and speeds are present. Sold in a pack of 3.

BUNTING BEARINGS

BUNTING BEARINGS Lubricated Sleeve Bearing

BrandBUNTING BEARINGS

Sign inAvailable

This clamp-on Oldham coupling hub is designed for keyed shafts in motion control applications. It accommodates 0.5° angular misalignment and 0.2 mm axial motion, protecting connected equipment from misalignment-induced wear. The hub is part of the MOCC57 series.

RULAND MANUFACTURING

RULAND MANUFACTURING Clamp-On Oldham Coupling Hub for Keyed Shafts, MOCC57-20-A

BrandRULAND MANUFACTURING

Sign inAvailable

Needle roller thrust bearing with 3 in bore diameter, 3 3/4 in outside diameter, and 0.078 in overall width. Supports axial loads in compact spaces at speeds up to 4,000 RPM. Suitable for applications such as gearboxes, pumps, and machine tools where thrust loads must be managed within tight assemblies.

TRITAN

TRITAN NTA4860 Needle Roller Thrust Bearing

BrandTRITAN

Sign inAvailable

Withdrawal sleeve assembly for mounting bearings onto inch-dimension shafts. Steel construction with 5 3/16 in bore diameter. Compatible with lock nut N030. Used in industrial machinery such as conveyors, pumps, and gearboxes to secure bearings and facilitate removal during maintenance.

STANDARD LOCKNUT

STANDARD LOCKNUT Withdrawal Sleeve Assembly

BrandSTANDARD LOCKNUT

Sign inAvailable

← Prev 1…33 34 35 36 37…4547 Next →