We ship to the Philippines — door-to-door, customs and logistics handled by 3G Electric

compress

Pneumatics

Pneumatic components — cylinders, valves, FRLs, fittings and air preparation for compressed-air automation and control systems.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 1 of 328

The ROBOHAND RA-5M is a two-finger angular gripper with a metric design and IP43 protection. It operates at a minimum pressure of 40 psi and a maximum pressure of 100 psi. Typical applications include pick-and-place, assembly, and material handling in automated systems.

ROBOHAND RA-5M Two-Finger Angular Gripper, Metric, IP43, 40-100 psi

BrandROBOHAND

Sign inAvailable

The SMC D-Y7BW is a perpendicular solid state auto switch with IP67 protection, operating on 24 V DC. It is a direct 2-wire switch designed for perpendicular mounting on pneumatic cylinders to detect piston position. This sensor provides a 24 V DC output signal for integration with PLCs or controllers in industrial automation applications such as packaging, material handling, and assembly lines.

SMC D-Y7BW Perpendicular Solid State Auto Switch, IP67, 24 V DC

BrandSMC

Sign inAvailable

No image available

Parker SK15104MA1 Seal Kit for 4MA Tie Rod Pneumatic Actuators

BrandParker

Sign inAvailable

Knurled meter-out speed controller with pilot check valve, 1/4 in valve body size. Used in pneumatic systems to regulate exhaust air speed from actuators and prevent backflow, enabling controlled motion and load holding.

SMC ASP430F-F02-06S Adjustable Direction Speed Controller with Pilot Check Valve

BrandSMC

Sign inAvailable

Pneumatic parallel gripper with multi-position sensing, operating at 40 to 100 psi with a maximum pressure of 100 psi. Overall length 34.9 mm. Suitable for pick-and-place, assembly, and material handling tasks requiring precise gripping and position feedback.

ROBOHAND DPG-10M-2 Multi-Position Sensing Parallel Gripper

BrandROBOHAND

Sign inAvailable

This connecting element is designed for use with pneumatic slides to provide a rigid mounting interface for actuators or tooling. It features M3/M4 mount hole sizes and Ø4x6/Ø5x2.5 center bushing sizes. Typical applications include automated assembly, packaging, and material-handling systems.

AFAG Connecting Element for Pneumatic Slides

BrandAFAG

Sign inAvailable

This pivot mounting bracket is designed for use with pneumatic actuators and other equipment requiring angular movement. It fits a 7/16 in bore diameter and has an overall length of 3/4 in. Suitable for general industrial mounting applications where pivot-style alignment is needed.

SPEEDAIRE Pivot Mounting Bracket, Fits 7/16 in Bore, 3/4 in Overall Length

BrandSPEEDAIRE

Sign inAvailable

Solid state switch for pneumatic position sensing, operating at 24 V DC with M12-4Pin connector. Rated IP67 for dust and water ingress protection. Used to detect cylinder piston position without mechanical contact in industrial automation applications such as valve control, robotics, and assembly lines.

SMC D-Y59BSDPC Inline Solid State Auto Switch, M12-4Pin, IP67, 24 V DC

BrandSMC

Sign inAvailable

No image available

Parker SK32104MA5 Seal Kit for 4MA Tie Rod Pneumatic Actuators

BrandParker

Sign inAvailable

Aluminum cap detachable clevis for mounting pneumatic cylinders with a 2 1/2 inch bore diameter. Provides a pivot point for the cylinder rod, enabling angular movement in automated machinery, packaging lines, and material handling systems.

SPEEDAIRE Clevis Mounting Hardware, Fits 2 1/2 in Bore Dia

BrandSPEEDAIRE

Sign inAvailable

← Prev1 2 3…328 Next →