MEDCASTER

MEDCASTER casters are available with several brake options: side brakes, face brakes, and total lock mechanisms. Side brakes engage a lever on the side of the caster to lock the wheel, while face brakes apply pressure to the wheel tread. Total lock systems simultaneously lock both the wheel and the swivel action, providing maximum stability for equipment that must remain stationary. The specific brake type is indicated in the product specifications, such as 'Swivel with Brake' or 'Swivel with Total Lock'.

Yes, MEDCASTER offers antimicrobial and debris-resistant caster models designed for sterile environments. The antimicrobial variants incorporate additives in the wheel material to inhibit microbial growth, while debris-resistant designs feature sealed bearings and smooth surfaces that reduce particle accumulation. These casters are commonly used in operating rooms, pharmaceutical cleanrooms, and laboratory settings where contamination control is critical. The bolt-hole and plate mounting options allow for secure attachment to medical equipment without exposed fasteners that could trap debris.

MEDCASTER casters are offered with wheel materials including neoprene, rubber, and nylon. Neoprene wheels provide good chemical resistance and quiet operation, making them suitable for hospital corridors. Rubber wheels offer high traction and shock absorption, ideal for uneven floors or equipment that requires smooth starts. Nylon wheels are hard-wearing and resistant to oils and solvents, often used in areas with frequent cleaning. Each material is selected based on the application's load capacity, floor type, and exposure to cleaning agents.

MEDCASTER casters come in three primary mounting types: bolt-hole, plate, and threaded stem. Bolt-hole casters require pre-drilled holes in the equipment frame and are secured with bolts. Plate casters use a flat mounting plate with four holes for bolting or welding. Threaded stem casters have a threaded stem that screws into a matching threaded socket on the equipment. The choice depends on the equipment's existing mounting configuration. For example, bolt-hole casters are common on hospital beds, while threaded stems are used on IV poles and small carts. Refer to the product specifications for mounting height and hole pattern dimensions.

Load capacities for MEDCASTER casters vary by model and wheel size. For example, 3-inch diameter casters typically support loads up to 100-150 kg per caster, while 6-inch diameter models can handle up to 200-250 kg. The exact capacity depends on wheel material, bearing type, and mounting configuration. Always check the manufacturer's specifications for the specific MPN to ensure the caster meets the equipment's weight requirements. Overloading can cause premature wear or failure, especially in high-use medical environments.

MEDCASTER casters with rubber or neoprene wheels are generally suitable for low-pile carpet, as these materials provide adequate grip and reduce rolling resistance. Nylon wheels may be less ideal on carpet due to harder treads that can cause noise and increased effort. For high-pile or thick carpet, consider casters with larger wheel diameters (4 inches or more) to distribute weight and prevent sinking. The swivel design with brake allows for easy maneuvering and locking on carpeted surfaces. Always test a sample caster on the specific carpet type to confirm performance.