precision_manufacturing

Machining & Tooling

Machining & tooling supplies — cutting tools, inserts, abrasives and workholding for precision metalworking, fabrication and production machining.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 9393 of 11571

CHICAGO-LATROBE

CHICAGO-LATROBE Spiral Point Tap: 3/4"-10 UNC, H3 / 2B, 3 Flute, Bottoming Chamfer

BrandCHICAGO-LATROBE

Sign inAvailable

This digging chisel bit is designed for use with spline-drive demolition hammers and rotary hammers. It features a 4-1/2 in head width for efficient material removal in breaking up concrete, asphalt, and compacted soil. Overall length is 16-3/4 in with a 3/4 in shank diameter.

MILWAUKEE

MILWAUKEE 48-62-2095 Digging Chisel Bit for Spline Demolition &

BrandMILWAUKEE

Sign inAvailable

This 100° countersink features six flutes for smooth, chatter-free operation. Made from AlTiN-coated high speed steel, it is suited for chamfering holes in ferrous and non-ferrous materials. The 2 in body diameter and 3/4 in shank fit standard industrial tooling.

KEO

KEO 100° Smooth-Finish Six-Flute Countersink

BrandKEO

Sign inAvailable

Triangle (T) indexable turning insert with TNMG432 geometry and UD51 chipbreaker. Grade 220408 is suited for medium-duty turning, facing, and profiling of steel, stainless steel, and cast iron. Fits standard tool holders accepting TNMG432 inserts.

ULTRA-DEX USA

ULTRA-DEX USA TNMG432 UD51 Triangle Indexable Turning Insert, Grade 220408

BrandULTRA-DEX USA

Sign inAvailable

Square indexable milling insert with 6 mm cutting edge length, 3 mm thickness, and 4 mm inscribed circle. Grade F55 provides wear resistance for general-purpose face and shoulder milling on steel, stainless steel, and cast iron in medium-duty operations.

WALTER

WALTER Square Milling Insert SPMT060304-F55

BrandWALTER

Sign inAvailable

This oversized chucking reamer is made of high-speed steel with a straight-flute design. It has a 0.501-inch diameter and is oversized by 1/2 inch. Used for enlarging and finishing pre-drilled holes to a precise size in general machining applications.

OEM

OEM Oversized Straight-Flute High-Speed Steel Chucking Reamer

BrandOEM

Sign inAvailable

This reduced-neck carbide square end mill is designed for machining aluminum and non-ferrous materials. It features an NF1 coating and 3 flutes, with a 3/4" mill diameter, 1" length of cut, and 5" overall length. The reduced-neck geometry provides clearance for deep slotting and profiling operations in CNC milling applications.

OEM

OEM Reduced-Neck Carbide Square End Mill for Aluminum

BrandOEM

Sign inAvailable

High-speed steel spiral-point extension tap for #10-32 UNF threads. Features a plug chamfer and 2 flutes, with H3 / 2B-3B thread class. The extended shank enables threading in deep or recessed holes, while the spiral-point design pushes chips ahead for through-hole applications.

OSG

OSG #10-32 UNF Spiral-Point Extension Tap

BrandOSG

Sign inAvailable

This steel T-slot nut is designed for 3/4 in T-slots and features a 1/2"-13 partially threaded hole. It slides into machine table T-slots to secure workpieces, fixtures, and clamps for machining, milling, and industrial assembly applications. Width is 1 1/4 in.

TE-CO

TE-CO Partially Threaded T-Slot Nut

BrandTE-CO

Sign inAvailable

Class X No-Go pin gauge with 0.6668 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used for go/no-go inspection of hole diameters to verify that a hole does not exceed its maximum allowable size. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge 0.6668 in

BrandVERMONT GAGE

Sign inAvailable

← Prev 1…9391 9392 9393 9394 9395…11571 Next →