precision_manufacturing

Machining & Tooling

Browse Machining & Tooling equipment and supplies in the Philippines. 710,782 products in stock from leading manufacturers. Source genuine parts for your plant.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 8351 of 11571

Exchangeable tip spade drill insert with H-coating on cobalt high-speed steel. Designed for drilling operations in metalworking, providing a hole diameter of 3 17/32 in. The coating enhances wear resistance for extended tool life.

YG-1 TOOL

YG-1 TOOL SV525334 H-Coated Cobalt HSS Spade Drill Insert, 3 17/32 in Hole Dia

BrandYG-1 TOOL

Sign inAvailable

Class X Go (Plus) pin gauge with 0.6473-inch diameter and 0.00004-inch tolerance. Used for go/no-go inspection of hole diameters to verify minimum allowable size. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X Go (Plus) Pin Gauge - 0.6473 in

BrandVERMONT GAGE

Sign inAvailable

Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive workpieces. Available in CNGP432 and CNGP120408 geometries, designed for fine finishing and light roughing operations in high-speed turning applications.

WIDIA

WIDIA Diamond Indexable Turning Insert CNGP432/CNGP120408

BrandWIDIA

Sign inAvailable

Class X No-Go (Minus) pin gauge with 0.9607 in diameter, 2 in length, and ±0.00006 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its specified upper diameter limit in quality control and inspection applications.

VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge

BrandVERMONT GAGE

Sign inAvailable

General-purpose high-speed steel jobber-length drill bit with a titanium nitride (TiN) coated tip for reduced friction and extended tool life. The 135° split point eliminates walking for precise starts. Suitable for drilling in metal, wood, and plastics.

CLE-LINE

CLE-LINE #1 TiN Tip HSS Jobber-Length Drill Bit

BrandCLE-LINE

Sign inAvailable

Class ZZ Go (Plus) plug and pin gauge with 0.4890 in diameter and 0.00020 in tolerance. Made of steel with black oxide finish. Used to verify minimum acceptable hole diameter in precision machining and quality control applications.

VERMONT GAGE

VERMONT GAGE Class ZZ Go (Plus) Plug & Pin Gauge - 0.4890 in, Black Oxide Finish

BrandVERMONT GAGE

Sign inAvailable

Spiral-point tap for threading blind or through holes in aerospace materials. Features M3x0.5 metric thread, H9 tolerance, plug chamfer, TiN coated cobalt construction, and 3 flutes for chip evacuation in high-strength alloys.

OSG

OSG Spiral-Point Tap M3x0.5 Metric H9 Plug Chamfer TiN Coated

BrandOSG

Sign inAvailable

This chucking reamer is made from high-speed steel with a straight flute design and a 0.254-inch diameter. It is used for precision reaming operations to enlarge and finish holes to tight tolerances in machining applications.

YANKEE

YANKEE Straight-Flute High-Speed Steel Chucking Reamer

BrandYANKEE

Sign inAvailable

Fractional-inch standard-wall headed gun drill bushing with 15/32 in inside diameter, 1 in outside diameter, and 1 in length under head. Inside diameter tolerance is 0.0000 in /+0.0002 in; outside diameter tolerance is +0.0000 in /-0.0002 in. Used to guide drill bits in deep-hole drilling operations requiring precise hole alignment.

BONEHAM

BONEHAM Fractional-Inch Standard-Wall Headed Gun Drill Bushing GDE6416.4688

BrandBONEHAM

Sign inAvailable

Class X Go (Plus) pin gauge with 0.9749 in diameter and 0.00006 in tolerance. Used for verifying the minimum acceptable hole size in precision inspection. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X Go (Plus) Pin Gauge - 0.9749 in

BrandVERMONT GAGE

Sign inAvailable

← Prev 1…8349 8350 8351 8352 8353…11571 Next →