precision_manufacturing

Machining & Tooling

Machining & tooling supplies — cutting tools, inserts, abrasives and workholding for precision metalworking, fabrication and production machining.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 10349 of 11571

CLEVELAND

CLEVELAND C70456 Square Carbide Roughing End Mill for Nonferrous Materials

BrandCLEVELAND

Sign inAvailable

Replacement filter pack for JDC-501 dust collectors. Each filter captures 99% of particles down to 5 microns. Suitable for machining and fabrication environments where metal dust and particulates are generated.

JET

JET 414705 Metal Dust Collector Filter, 2-Pack, 99% @ 5 Micron

BrandJET

Sign inAvailable

Class X No-Go (minus) pin gauge with 0.8664 in diameter, 2 in length, uncoated steel, and ±0.00006 in tolerance. Used to verify that a hole does not exceed its maximum allowable size; the gauge should not enter the hole if within tolerance. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge - Dia. 0.8664 in

BrandVERMONT GAGE

Sign inAvailable

This combination square set features a 12-inch brushed steel blade with SAE graduations of 1/64 in (Quick Reading). It includes a center/reversible protractor and square head, with cast iron construction. Designed for layout, measurement, and inspection tasks in machining and metalworking, it combines square, protractor, and center head functions in one tool.

STARRETT

STARRETT 9-12-16R Machinist Precision Steel Combination Square Set

BrandSTARRETT

Sign inAvailable

This auger-style cable drill bit is designed for pulling cable through walls and ceilings. Made from carbon steel, it features a 9/16 in drill bit size and 36 in overall length. Commonly used by electricians and low-voltage installers for routing wiring through studs and joists in construction.

EAGLE TOOL US

EAGLE TOOL US Auger-Style Cable Drill Bit

BrandEAGLE TOOL US

Sign inAvailable

This solid carbide jobber-length drill bit features a 135° 4-facet point and slow spiral flute design, optimized for horizontal drilling in hard materials. It is suited for precision holemaking in metalworking and fabrication applications.

OSG

OSG Solid Carbide Jobber-Length Drill Bit #27, 135° 4-Facet Point, Slow Spiral

BrandOSG

Sign inAvailable

Indexable insert drill for general drilling applications in metalworking and machining. Uses replaceable carbide inserts for efficient hole-making in a range of materials. Provides consistent performance with extended tool life through replaceable cutting edges.

KYOCERA

KYOCERA CD1660C Indexable Insert Drill

BrandKYOCERA

Sign inAvailable

Class X No-Go (Minus) pin gauge with 0.2594 in diameter, 0.00004 in tolerance, 2 in length, uncoated steel. Used to verify that a hole does not exceed its maximum allowable size in quality control and inspection applications.

VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge - Dia. 0.2594 in

BrandVERMONT GAGE

Sign inAvailable

This SDS-Plus drill bit is designed for rotary hammer drilling in concrete and masonry materials. With a 5.5 mm diameter and 100 mm maximum drilling depth, it is suited for anchor and fastener installation. Overall length is 160 mm.

MILWAUKEE

MILWAUKEE SDS-Plus Concrete & Masonry Drill Bit

BrandMILWAUKEE

Sign inAvailable

Steel plug and pin gauge with black oxide finish, 0.5830 inch diameter, Class ZZ no-go (minus) tolerance of 0.00020 inch, and surface finish of 10 microinch or better. Used to verify that a hole diameter does not exceed the upper tolerance limit in machining and inspection applications.

VERMONT GAGE

VERMONT GAGE Class ZZ No-Go (Minus) Plug & Pin Gauge

BrandVERMONT GAGE

Sign inAvailable

← Prev 1…10347 10348 10349 10350 10351…11571 Next →