valve

Hydraulics

Browse hydraulics equipment & supplies in the Philippines. 710,782 products in stock from leading global manufacturers. Source genuine parts for industrial systems.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 729 of 771

This standard-duty tie-rod hydraulic cylinder features a 2-inch bore, 6-inch stroke, 1 1/8-inch rod diameter, and 3/8-inch NPT ports. Double-acting design suits linear motion tasks such as pushing, pulling, or lifting in industrial hydraulic systems.

MAXIM

MAXIM Standard-Duty Tie-Rod Cylinder

BrandMAXIM

Sign inAvailable

Normally closed, two-way, electrical solenoid cartridge valve with steel body and Nitrile seal. Overall height 4.12 in, cavity type C-12-2 or C-12-2U. Used for on/off flow control in hydraulic systems such as mobile equipment, material handling, and machine tools.

CHAR-LYNN

CHAR-LYNN 02-180114 Solenoid Cartridge Valve

BrandCHAR-LYNN

Sign inAvailable

This lightweight hollow ram provides 60 tons of nominal capacity with a 4-inch nominal stroke. The 2.13-inch center hole with right-hand thread allows rods or cables to pass through for pulling, pushing, or lifting applications. Suitable for industrial maintenance, construction, and pressing tasks requiring through-hole capability.

POWER TEAM

POWER TEAM RHA604D Lightweight Hollow Ram, 60 ton, 4 in Stroke, 2.13 in RH

BrandPOWER TEAM

Sign inAvailable

Single head return line hydraulic filter with paper element. Rated for maximum pressure of 100 psi. Used in hydraulic systems to filter return oil, protecting downstream components.

LENZ

LENZ Single Head Return Line Hydraulic Filter, 221005

BrandLENZ

Sign inAvailable

This hydraulic ram has a nominal capacity of 55 tons, a 4-inch stroke, and an effective area of 11.04 sq in. The lock nut mechanism holds loads mechanically after hydraulic pressure is released. Used in industrial lifting, pressing, and maintenance tasks requiring secure load support.

POWER TEAM

POWER TEAM RGL554 General Purpose Lock Nut Ram, 55 Ton, 4 in Stroke

BrandPOWER TEAM

Sign inAvailable

This AC motor from MONARCH is designed to drive hydraulic pumps in industrial systems. It is suitable for applications such as material handling, machining, and power transmission equipment. For detailed electrical specifications, consult the manufacturer's datasheet.

MONARCH AC

MONARCH AC Motor 50020502371705

BrandMONARCH AC

Sign inAvailable

Double-acting welded hydraulic cylinder with swivel-ball mount for flexible alignment. Bore diameter 3 in, stroke length 30 in, retracted length 38 1/4 in, rated at 21,200 lb. Suitable for linear actuation in material handling, construction, and heavy machinery applications.

MAXIM

MAXIM Swivel-Ball Mount Welded Hydraulic Cylinder

BrandMAXIM

Sign inAvailable

Standard AC hydraulic power unit with a 5 hp motor, 3000 psi maximum pressure, and 15 gallon reservoir capacity. Features a 1-stage gear pump and vertical mounting configuration. Suitable for powering hydraulic presses, lifts, and conveyors in industrial settings.

MONARCH

MONARCH Standard AC Hydraulic Power Unit

BrandMONARCH

Sign inAvailable

ENERPAC

ENERPAC BSH1090 Hex Socket, 1 in Drive, 90 mm, Metric

BrandENERPAC

Sign inAvailable

This B-Type loaded U-cup rod seal is designed for dynamic sealing on reciprocating rods in hydraulic or pneumatic cylinders. It features a 1/4 in height and fits a 0.275 in groove width. Constructed from urethane with a 95 Shore A hardness, it provides effective fluid retention and contaminant exclusion.

OEM

OEM B-Type Loaded U-Cup Rod Seal, 1/4 in Height, For 0.275 in Groove Width, Urethane

BrandOEM

Sign inAvailable

← Prev 1…727 728 729 730 731…771 Next →