valve

Hydraulics

Hydraulic pumps, valves, cylinders, hoses and fittings for industrial power systems — dependable components sourced and supplied across Southeast Asia.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 4 of 771

Hydraulic cylinder with 8,800 lbf push capacity at 5000 psi and 1 in stroke. Threaded body design for compact mounting. Used for lifting, pressing, and clamping in industrial maintenance and repair applications.

ENERPAC

ENERPAC Standard Threaded Body Cylinder CST40251

BrandENERPAC

Sign inAvailable

Double-acting hydraulic cylinder with 2 in bore, 8 in stroke, 1 1/8 in rod diameter, and 3/8 in NPT ports. Suitable for linear motion in industrial machinery such as material handling, automation, and press equipment.

MAXIM

MAXIM Standard-Duty Tie-Rod Cylinder

BrandMAXIM

Sign inAvailable

This pump gear is a replacement component for hydraulic filtration systems. It is used to maintain fluid flow and pressure in industrial hydraulic circuits, supporting equipment such as presses, lifts, and conveyors that rely on clean, pressurized oil.

Parker

PARKER Pump Gear, Part Number 947623

BrandParker

Sign inAvailable

ENERPAC

ENERPAC ZU4204TE-Q Corded Electric Hydraulic Torque Wrench Pump Unit

BrandENERPAC

Sign inAvailable

This pump motor adapter connects a pump to a motor with 56C-145TC frame size. It features an SAE A 4 Bolt configuration and is constructed from cast aluminum, suitable for horizontal or vertical mounting in fluid-handling systems.

LDI INDUSTRIES

LDI INDUSTRIES Pump Motor Adapter, SAE A 4 Bolt, Cast Aluminum

BrandLDI INDUSTRIES

Sign inAvailable

Steel screw-in counterbalance cartridge valve with screwdriver adjustment and nitrile seals. Designed for C08-25 cavity size. Used in hydraulic systems to control actuator motion and prevent load runaway in applications such as cranes, lifts, and presses.

BUCHER HYDRAULICS

BUCHER HYDRAULICS CBPS-08-N-S-0-50 Counterbalance Cartridge Valve

BrandBUCHER HYDRAULICS

Sign inAvailable

Steel-bodied check valve for high-pressure hydraulic systems. Allows flow in one direction and prevents backflow. Rated for 5,000 psi and 2 gpm. Inlet is 7/16 in JIC 37° Flare; outlet is SAE O-Ring Boss. Used in industrial machinery, mobile equipment, and hydraulic power units.

Parker

PARKER DT-250-MFMO-5 High-Pressure Check Valve

BrandParker

Sign inAvailable

This rod seal kit is designed for hydraulic or pneumatic cylinders with a 1 in rod diameter and 0.156 in groove width. It includes four pieces: one backup ring, one U-cup, one wiper, and one O-ring, all made of Buna N material. The kit provides sealing at the rod end to prevent fluid leakage and contamination ingress in industrial equipment.

OEM

OEM Rod Seal Kit for 1 in Rod Diameter, 0.156 in Groove Width, Buna N, 4 Pieces

BrandOEM

Sign inAvailable

Silver die from the 80 Series for use with TH8-380 crimpers. Accommodates 2 wire braid and 4/6 spiral hose. Maximum hose diameter 165 mm.

PARKER KRIMPER DIE

PARKER KRIMPER DIE PB239-80-31

BrandPARKER KRIMPER DIE

Sign inAvailable

Caged ram puller with 5 ton nominal cylinder capacity. Includes gauge adapter, 10,000 psi (690 bar) gauge, and two-speed manually operated pump. Used for removing bearings, gears, pulleys, and other press-fit components in industrial maintenance and repair.

POSI LOCK

POSI LOCK PTPHC-206 5 Ton Caged Ram Puller

BrandPOSI LOCK

Sign inAvailable

← Prev 1 2 3 4 5 6…771 Next →