bolt

Electrical & Automation

Industrial electrical & automation components — circuit protection, contactors, relays, PLCs, drives and controls from trusted brands for Singapore industry.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 495 of 6105

SQUARE D

SQUARE D HOM215GFI Miniature Circuit Breaker, 15 A, 2-Pole, 120/240V AC, 10kA

BrandSQUARE D

Sign inAvailable

This end barrier provides physical separation and secure positioning for male and female connector assemblies on a 35 mm DIN rail. It features a clip-on mount and is compatible with WAGO model 210-113 connectors. Commonly used in industrial control panels and junction boxes to organize wiring and prevent connector movement.

WAGO

WAGO 209-137 End Barrier, Clip-On Mount for 35 mm DIN Rail, Gray

BrandWAGO

Sign inAvailable

Metallic EN50047 body and receptacle assembly for limit switches. Features screw clamp terminals, 1 normally open and 1 normally closed contact configuration, and 2 mounting holes. Used in industrial automation for position sensing and machine safety applications.

TELEMECANIQUE SENSORS

TELEMECANIQUE SENSORS ZCD21 Limit Switch Body & Receptacle Assembly

BrandTELEMECANIQUE SENSORS

Sign inAvailable

IFM

IFM KI3513 Capacitive Cylindrical Proximity Sensor

BrandIFM

Sign inAvailable

BURNDY

BURNDY BIBS2/03 Dry-Location Single-Sided Entry Multitap Connector

BrandBURNDY

Sign inAvailable

Female cartridge time-delay fuse rated 60 A at 12 V DC. Yellow housing indicates the FMX series. Designed for automotive circuits requiring slow-blow protection to handle temporary current surges without nuisance opening.

BUSSMANN

BUSSMANN FMX-60 Female Time-Delay Fuse

BrandBUSSMANN

Sign inAvailable

Single-conductor GXL wire with 12 AWG stranded copper conductor and black cross-linked polyethylene (XLPE) insulation. Rated for 60 V and supplied on a 500 ft spool. Suitable for general-purpose primary wiring in vehicles, trailers, and off-road equipment where heat, abrasion, and chemical resistance are required.

OEM

OEM GXL XLPE-Insulated General Purpose Primary Wire, 12 AWG, 500 ft, Black, 60 V

BrandOEM

Sign inAvailable

One-hole compression lug for terminating 2 AWG solid or stranded aluminum wire to a 1/4 in stud. Long type designed for use in industrial control panels, switchgear, and power distribution systems requiring secure, low-resistance connections.

THOMAS & BETTS

THOMAS & BETTS 60116 One-Hole Compression Lug

BrandTHOMAS & BETTS

Sign inAvailable

This circular plug with cable gland is part of the Trim Trio UTGX series, designed for harsh environments. It features 12 male contacts, rated 10 A at 250 V, and accepts 20 AWG to 18 AWG wire with solder termination. The connector uses 1/3 Bayonet coupling and is IP68 rated, making it suitable for applications requiring protection against dust and water ingress.

SOURIAU

SOURIAU Trim Trio UTGX Harsh Environment Circular Connector Plug

BrandSOURIAU

Sign inAvailable

Single receptacle outlet with NEMA 6-20 configuration, rated 20 A at 250 V AC, 2-pole/3-wire grounding. Orange housing for voltage identification. Suitable for powering equipment in industrial and commercial settings requiring a dedicated high-voltage outlet.

LEVITON

LEVITON 5461-IG Single Receptacle, 6-20, 20A, 250V AC, Orange

BrandLEVITON

Sign inAvailable

← Prev 1…493 494 495 496 497…6105 Next →