restaurant

Food & Beverage Processing

Browse Food & Beverage Processing equipment & supplies from 3G Electric. 18,989 products in stock from 12 brands, sourced worldwide. Order now.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 1576 of 1899

This water purification system produces Type II deionized water from tap water by removing ions. It delivers a flow rate of 7 L/hr with a resistivity of 10 Mohm.cm at 25°C. The unit features a 3/4" NPT feed connection and does not include feed water monitoring. Typical applications include reagent preparation, glassware rinsing, and feed for clinical analyzers.

THERMO SCIENTIFIC

Thermo Scientific Water Purification System, Type II Water, 7 L/hr, 10 Mohm.cm

BrandTHERMO SCIENTIFIC

Sign inAvailable

Steel wire decking with powder-coated gray finish and waterfall edge. 14 ga standard-channel design provides a secure surface for pallet rack beams, supporting unit loads while allowing light and sprinkler water to pass. Suitable for warehouse and industrial storage applications.

LYON

LYON Standard-Channel Waterfall Wire Pallet Rack Decking, 46 in x 42 in, Gray

BrandLYON

Sign inAvailable

Replacement impeller and sleeve assembly for dewatering and wastewater pumps. Constructed of Buna-N (nitrile) material. Used to move water and sludge in industrial sump, construction site, and municipal wastewater applications.

Dayton

Dayton Buna-N Impeller/Sleeve Assembly

BrandDayton

Sign inAvailable

This spring-return hose reel stores and manages air or water hoses in workshops and maintenance areas. It holds up to 50 ft of 3/8 in I.D. hose and features a brass swivel and 3/8 in MNPT connection. Maximum operating pressure is 300 psi. Overall dimensions: 20 in L x 9 in W x 22 in H.

SPEEDAIRE

SPEEDAIRE Spring-Return Hose Reel, 50 ft Capacity, 3/8 in MNPT, 300 psi

BrandSPEEDAIRE

Sign inAvailable

Stainless steel press fitting with press-fit x FTG connection and EPDM seal. Designed for joining 3/4 in potable water piping in plumbing systems. Part of the SmartPress series.

APOLLO

APOLLO SmartPress Crimp Elbow Fitting: 3/4 in Pipe x 3/4 in Pipe Size

BrandAPOLLO

Sign inAvailable

This rigid 90-degree elbow fitting connects a 3/4 in hose to a 1/2 in NPT male thread via a beaded barb. Suitable for air, water, and chemical transfer in industrial fluid systems requiring directional changes.

SPEEDAIRE

SPEEDAIRE 90-Degree Elbow Beaded Barbed Hose Fitting

BrandSPEEDAIRE

Sign inAvailable

Watts

Watts 1" LFN45BDU-EZ-M1 Standard Capacity Water Pressure Regulator

BrandWatts

Sign inAvailable

NILFISK

NILFISK Switch Assembly for Floor Cleaning Machines

BrandNILFISK

Sign inAvailable

General purpose commercial gas water heater with 40-gallon nominal tank capacity, 60,000 BTU input, and Low NOx compliant burner. Features direct spark to pilot ignition, automatic thermostat, T&P relief valve, and 4-inch vent connection. Recovery rate of 69 gph at 80°F rise; maximum recovery flow rate of 138 gph at 40°F rise. Certified to Canada CSA standards.

RHEEM-RUUD

RHEEM-RUUD G50-60N Commercial Gas Water Heater

BrandRHEEM-RUUD

Sign inAvailable

Green adhesive pipe marker with white 'HVAC Supply' legend, designed for pipe outer diameters from 2-1/2 to 7-7/8 inches. Sold in a 5-pack without arrows, it provides clear identification for HVAC supply lines in commercial or industrial facilities.

BRADY

BRADY HVAC Supply Adhesive Pipe Marker

BrandBRADY

Sign inAvailable

← Prev 1…1574 1575 1576 1577 1578…1899 Next →

Top brands in Food & Beverage Processing

Manufacturers serving this application.