restaurant

Food & Beverage Processing

Browse Food & Beverage Processing equipment & supplies from 3G Electric. 18,989 products in stock from 12 brands, sourced worldwide. Order now.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Browse:

Show

Page 1446 of 1899

ELGA

ELGA Flex 1, 2 & 6 Expendable and Sanitization Kit SK-CSPFLEX-E

BrandELGA

Sign inAvailable

Thermocouple for temperature sensing in gas-fired furnaces, boilers, and water heaters. Generates a voltage signal proportional to temperature for flame detection and burner control. Replacement component for HVACR systems.

JOHNSON CONTROLS

JOHNSON CONTROLS K19AT-18 Thermocouple

BrandJOHNSON CONTROLS

Sign inAvailable

This one-station water chiller delivers 8 gallons per hour at 50°F, operating on 115V. With an overall height of 17 3/8 inches and width of 15 7/8 inches, it is designed for single-fountain applications in commercial or institutional settings.

SLOAN

SLOAN RC8000 One Station Water Chiller, 8 gph @ 50°F, 115V

BrandSLOAN

Sign inAvailable

Pressure switch for HVACR systems, used to monitor and control fluid or gas pressure. Triggers an electrical contact at a set pressure point to protect compressors, pumps, and refrigeration circuits from overpressure or underpressure conditions.

UNITED ELECTRIC

UNITED ELECTRIC J40-230 Pressure Switch

BrandUNITED ELECTRIC

Sign inAvailable

This PVC bulk water hose features synthetic braid and PVC helix reinforcement for flexibility and crush resistance. Suitable for suction and discharge of water in industrial, agricultural, and construction applications. Clear with orange markings, 6-inch inside diameter, 70 psi rating, 25-foot length, temperature range -13° to 140°F.

CONTINENTAL

CONTINENTAL PVC Bulk Water Suction & Discharge Hose with

BrandCONTINENTAL

Sign inAvailable

This actuator is designed for use in HVACR systems to control dampers or valves in commercial and industrial heating, ventilation, and air conditioning applications. It provides positioning for air handling units, variable air volume boxes, and zone control systems.

SCHNEIDER

SCHNEIDER CP-9301-456 Actuator

BrandSCHNEIDER

Sign inAvailable

This motor overload-protected pressure switch features a diaphragm actuator and a pressure range of 60 psi to 232 psi. It includes three 1/4" FNPT connections and an Auto/Off/Reset switch mode. Typical applications include protecting motors in air and water systems such as industrial pumps, compressors, and irrigation equipment.

CONDOR USA

CONDOR USA Motor Overload-Protected Pressure Switch

BrandCONDOR USA

Sign inAvailable

This PVC water discharge hose assembly features synthetic fabric reinforcement for strength. With a 3-inch inside diameter, it is rated for 65 psi and operates from -5° to 150°F. Suitable for water transfer and light slurry handling in industrial, agricultural, and construction settings.

OEM

OEM PVC Water Discharge Hose Assembly with Synthetic Fabric Reinforcement

BrandOEM

Sign inAvailable

This probe cable depth marker is used to indicate measurement depths on cables during water quality testing. It assists in positioning sensors at specific depths in tanks, rivers, or treatment basins for consistent data collection.

HACH

HACH Probe Cable Depth Marker 5828610

BrandHACH

Sign inAvailable

This Buna-N (nitrile) impeller/sleeve assembly is a replacement component for dewatering and wastewater pumps. It is used to move water and sludge in industrial fluid-handling applications where resistance to oils and abrasives is required.

Dayton

Dayton Buna-N Impeller/Sleeve Assembly for Dewatering & Wastewater Pumps

BrandDayton

Sign inAvailable

← Prev 1…1444 1445 1446 1447 1448…1899 Next →

Top brands in Food & Beverage Processing

Manufacturers serving this application.