Nvent Caddy 3G-OTH-04732 — Technical Specifications
The NVENT CADDY Conduit & Cable Hanger - Snap Close (SKU 2KWP2) is a steel hanger for conduit and pipe with a corrosion-resistant coated gray finish. It supports a load capacity of 25 lb and is compatible with 1/2 in and 3/4 in trade sizes for EMT and RMC conduit, as well as cable with a maximum OD of 1.181 in. The hanger uses spring-pressure mounting for horizontal orientation, requires no tools, and is cULus listed.
Technical Specifications
| Parameter | Value |
|---|---|
| Type | 1/2 in to 3/4 in, Steel, 812M |
| Color | Gray |
| Finish | Corrosion Resistant Coated |
| UNSPSC | 39121202 |
| Material | Steel |
| Standards | cULus |
| For Use With | Cable |
| Load Capacity | 25 lb |
| Mounting Type | Spring Pressure |
| Flange Thickness | 1/2 in to 3/4 in |
| Country Of Origin | USA (subject to change) |
| Compatible Pipe Size | 1/2 in |
| For Maximum Cable OD | 1.181 in |
| For Minimum Cable OD | 0.709 in |
| Mounting Orientation | Horizontal |
| Mounting Hole Diameter | 0.281 in |
| Compatible Conduit Type | EMT |
| Manufacturer Part Number | 812M |
| Description/Special Features | No Tools Required |
| Compatible Conduit Trade Size | 1/2 in |
| Compatible Nominal Conduit/Pipe Size | 1/2 in |
Physical & Shipping Data
| Weight | 0.014 kg |
| Country of Origin | US |