Polyethylene Tubing Air Hose 8X5mm, 50m: Philippines Buyer's Guide [2026]
Table of Contentsexpand_more
A polyethylene tubing air hose 8X5mm, 50m is a coiled pneumatic tube made from polyethylene, with an 8 mm outside diameter and 5 mm inside diameter, sold in 50-metre lengths. It is used to distribute compressed air at low to medium pressure in industrial automation, packaging lines, and workshop air networks across the Philippines.
What is polyethylene tubing air hose 8X5mm, 50m?
A polyethylene tubing air hose 8X5mm, 50m is a flexible, chemical-resistant tube extruded from polyethylene resin, specified by its 8 mm OD and 5 mm ID, and supplied in a 50-metre coil. It connects pneumatic components such as cylinders, valves, and air tools in compressed-air systems.
Unlike rubber air hose, polyethylene tubing is lightweight, has a smooth bore for low friction loss, and resists many industrial chemicals. It is not suitable for high-pressure hydraulic service or high-temperature environments above its rated limits.
How does an 8X5mm polyethylene air hose work?
Compressed air flows through the 5 mm inside diameter bore. The 8 mm outside diameter provides wall thickness for pressure containment and push-in fitting compatibility. The tube is inserted into push-to-connect fittings or barbed fittings secured with clamps, creating a sealed pneumatic circuit.
Polyethylene's molecular structure gives it good flexibility and resistance to moisture, oils, and many solvents. However, it has lower pressure and temperature ratings than nylon or PTFE tubing, so it is best for low-pressure air distribution, not for high-cycle dynamic applications.
Quotable definition
A polyethylene tubing air hose 8X5mm, 50m is a coiled pneumatic tube with 8 mm outside diameter and 5 mm inside diameter, made from polyethylene, used for low-pressure compressed air distribution in industrial automation and workshop systems.
Specification table
| Parameter | Value |
|---|---|
| Outside diameter (OD) | 8 mm |
| Inside diameter (ID) | 5 mm |
| Length per coil | 50 m |
| Material | Polyethylene (PE) |
| Typical working pressure | Up to 10 bar (dependent on temperature) |
| Typical temperature range | -20 °C to +60 °C |
| Colour options | Natural, black, blue, red (varies by supplier) |
| Compatible fittings | Push-in, barbed (with clamp), compression |
Note: Actual pressure and temperature ratings vary by manufacturer. Always confirm with the supplier's datasheet.
Which type of polyethylene tubing suits your application?
Polyethylene tubing is available in low-density (LDPE) and high-density (HDPE) versions. LDPE is more flexible and suits tight routing; HDPE is stiffer and offers slightly higher pressure resistance. For general pneumatic air lines, LDPE is common. For chemical transfer or higher pressure, consider HDPE or alternative materials like nylon.
In the Philippines, food processing and packaging plants often use natural or blue PE tubing for visibility and cleanliness. Automotive workshops prefer black PE for UV resistance. Marine and mining applications may require UV-stabilised or flame-retardant grades.
Selection criteria
- Pressure rating: Confirm the working pressure at your operating temperature. PE tubing typically handles up to 10 bar at 20 °C, but derate for higher temperatures.
- Temperature range: Standard PE is rated -20 °C to +60 °C. For higher temperatures, consider nylon or PTFE.
- Chemical compatibility: PE resists many chemicals but is attacked by strong oxidisers and some hydrocarbons. Check compatibility charts.
- Fitting compatibility: Ensure the 8 mm OD matches your push-in or barbed fittings. For barbed fittings, use a clamp to secure.
- Environment: For outdoor use, choose UV-stabilised black PE. For food contact, select FDA-compliant grades.
- Duty cycle: PE tubing is not recommended for continuous flexing; use it in static runs or with strain relief.
Product selection ladder
While 3G Electric does not list polyethylene tubing itself, we stock a range of DIXON and DIXON VALVE & COUPLING stainless steel hose fittings to complete your pneumatic or fluid system. The table below compares representative fittings from our catalog, arranged from light-duty to heavy-duty and specialised connections.
| Model | Connection | Material | Best for |
|---|---|---|---|
| DIXON VALVE & COUPLING 303 SS Rigid Barbed Hose Fitting 1/4 in Hose x 1/4 in NPT Male | Hose barb x NPT male | 303 stainless steel | Light-duty air and water lines in tight spaces |
| DIXON VALVE & COUPLING 303 SS Rigid Barbed Hose Fitting 1/2 in Hose x 1/2 in NPT Male | Hose barb x NPT male | 303 stainless steel | General-purpose air and water transfer |
| DIXON 303 SS Push-On Hose Fitting 1/2 in x 1/2 in Male x Female Swivel | Hose barb x UNF swivel | 303 stainless steel | Quick-connect applications requiring swivel |
| DIXON 303 SS Push-On Barbed Hose Fitting 1 in Hose x UNF Male | Hose barb x UNF male | 303 stainless steel | Larger bore air and chemical lines |
| APPROVED VENDOR 316 SS Rigid Barbed Hose Fitting 1 in Hose x 3/4 in NPT Male | Hose barb x NPT male | 316 stainless steel | Corrosive environments, chemical transfer |
| DIXON VALVE & COUPLING 316 SS Rigid Barbed Hose Fitting Hose Barb x Flange | Hose barb x flange | 316 stainless steel | Flanged connections in sanitary or high-purity systems |
| DIXON VALVE & COUPLING 316 SS Rigid Barbed Hose Fitting 3 in Hose x Tri-Clamp | Hose barb x Tri-Clamp | 316 stainless steel | Large-bore sanitary and chemical lines |
Step up the ladder when you need higher corrosion resistance (316 SS), larger bore sizes, or specialised connections like flanges and Tri-Clamp. For standard pneumatic air lines with PE tubing, 303 SS barbed fittings with clamps are usually sufficient.
Why source from 3G Electric?
3G Electric is a global industrial solutions provider with over 35 years of experience, stocking 68+ products across 14 industrial departments. We interpret your demand and deliver genuine industrial equipment, parts, and supplies — from machining and electrical to pneumatics and hydraulics. Our specialist depth in combustion, pumps, and controls is a trust anchor, but we supply far more than is listed. We are curated and accountable: we get the right answer for your application, not just a catalog page. We deliver nationwide across the Philippines, with technical support to help you select the correct tubing and fittings.
Frequently asked questions
What is polyethylene tubing air hose 8X5mm, 50m used for?
It is used for low-pressure compressed air distribution in industrial automation, packaging machinery, workshops, and pneumatic tools. The 5 mm ID provides adequate flow for small cylinders and air tools, while the 8 mm OD fits standard push-in fittings.
Can I use 8X5mm PE tubing for water?
Yes, polyethylene tubing is suitable for water transfer at low pressure and ambient temperature. However, for potable water, ensure the tubing is certified food-grade. For hot water or high pressure, choose a different material.
What fittings work with 8X5mm polyethylene tubing?
Push-to-connect fittings sized for 8 mm OD are ideal. Barbed fittings with a 5 mm hose ID can also be used with a clamp. 3G Electric stocks DIXON and DIXON VALVE & COUPLING stainless steel barbed fittings in various sizes to suit your system.
How much does a 50m coil of 8X5mm PE tubing cost in the Philippines?
Pricing varies by brand, colour, and supplier. Expect a range of PHP 1,500 to PHP 3,500 per 50 m coil for standard natural PE tubing. For UV-stabilised or food-grade versions, expect higher. Contact 3G Electric for a current quote.
What is the delivery lead time for PE tubing in the Philippines?
3G Electric delivers nationwide. Lead time depends on stock availability and destination. Metro Manila deliveries are typically 2–5 business days; provincial areas may take 5–10 business days. For urgent requirements, contact us for expedited options.
Is PE tubing suitable for high-temperature air lines?
Standard polyethylene tubing is rated up to about 60 °C. For higher temperatures, use nylon, PTFE, or metal tubing. Always check the manufacturer's temperature derating curve for pressure.
Key takeaways
- Polyethylene tubing air hose 8X5mm, 50m is a low-pressure pneumatic tube for air distribution in automation and workshops.
- Verify pressure rating at operating temperature; standard PE handles up to 10 bar at 20 °C.
- Use push-in or barbed fittings sized for 8 mm OD; 3G Electric stocks DIXON stainless steel fittings.
- For outdoor or chemical applications, consider UV-stabilised or HDPE grades.
- 3G Electric provides nationwide delivery and technical support across the Philippines.
Ready to order or need sizing assistance? Contact 3G Electric for a quote on polyethylene tubing and compatible fittings. Our team will help you specify the right components for your pneumatic system.
