ZURN Z507-3NL Cast Iron Area Drain, 7 in Grate, 3 in Push On
The ZURN Z507-3NL is a cast iron area drain with a 12 1/8 in overall diameter and a 7 in grate size. It features a 3 in nominal pipe size and a Push On connection type. This floor drain is designed for industrial…
SKU 3G-OTH-429856
Also listed as: Z5073NL · Z507 3NL
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The ZURN Z507-3NL is a cast iron area drain with a 12 1/8 in overall diameter and a 7 in grate size. It features a 3 in nominal pipe size and a Push On connection type. This floor drain is designed for industrial drainage applications.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the ZURN Z507-3NL floor drain used for?
The ZURN Z507-3NL is a cast iron area drain designed for industrial drainage applications. It collects and removes surface water, washdown fluids, and debris from plant floors, loading docks, and processing areas. Its 7 in grate and Push On connection make it suitable for heavy-duty commercial and manufacturing environments.
What are the specifications of the ZURN Z507-3NL floor drain?
The ZURN Z507-3NL has a 12 1/8 in overall diameter, a 7 in grate size, and a 3 in nominal pipe size. It is made of cast iron with a Push On connection type. The manufacturer part number is Z507-3NL. These specs ensure compatibility with standard industrial drainage systems.
Where to buy the ZURN Z507-3NL floor drain worldwide?
3G Electric supplies the ZURN Z507-3NL floor drain worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. We source and deliver this cast iron drain to any international location.
How to install the ZURN Z507-3NL floor drain?
Install the ZURN Z507-3NL by connecting the Push On fitting to a 3 in pipe. Ensure the drain body is level and properly supported in the concrete slab. Follow standard cast iron drain installation practices: use a primer and solvent cement for Push On joints, and verify the grate sits flush with the finished floor surface.
Used in
Common applications for ZURNZURN Products
3G Electric supplies ZURN area drains. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- LEGRAND This straight-section single-channel raceway from the 4000 series is constructed of steel with a gray finish. It features a snap-on cover and screw-on mounting style. Used for routing and protecting electrical wiring in commercial and industrial buildings, it provides cable management for power, data, and communication lines in exposed or retrofit applications
- LEGRAND This steel blank end fitting terminates the end of a 4000 series single-channel raceway, providing a finished closure. It includes two 1/2-inch trade size knockouts to facilitate end feeding of cables. Suitable for use in electrical raceway systems where a secure end cap is required
- LEGRAND Steel entrance end fitting for single-channel raceways, 1 1/2 in height, 2 3/4 in raceway width. Features concentric 1/2 in, 3/4 in, and 1 in trade size knockouts on the end and each side. Gray finish. Used to terminate raceway runs and provide cable entry points
- LEGRAND This 90-degree flat elbow is designed for use with single-channel raceway systems to route cables around corners. Constructed from steel with a gray finish, it has a height of 1 3/4 inches and a raceway width of 4 3/4 inches. Suitable for commercial and industrial electrical installations where cable protection and organization are required
- LEGRAND Steel blank end fitting for terminating single-channel raceways in the 4000 series. Ivory finish. Includes two 1/2 in trade size knockouts to facilitate end feeding of cables. Used in commercial electrical installations to provide a finished end cap
- LEGRAND Steel tee fitting for branching single-channel raceways at right angles. Includes three couplings for secure connections. Part of the 3000 series with a 1-1/2 in height and 2-3/4 in raceway width. Finish is ivory
