USA INDUSTRIALS Schedule 40 Threaded on Both Ends Pipe with Thread Sealant
The USA INDUSTRIALS Pipe Nipple (SKU 3G-OTH-464422) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/2 in nominal pipe size and 24 in length. It features Male NPT x Male NPT threaded connections on…
SKU 3G-OTH-464422
Also listed as: ZUSAPF22394 · ZUSA PF 22394
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple (SKU 3G-OTH-464422) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/2 in nominal pipe size and 24 in length. It features Male NPT x Male NPT threaded connections on both ends, pre-applied PTFE thread sealant, and a maximum operating pressure of 125 psi @ 72°F.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a USA INDUSTRIALS pipe nipple used for?
A USA INDUSTRIALS pipe nipple connects two male threaded fittings in industrial piping systems. This Schedule 40 galvanized steel nipple is used for water, air, and low-pressure fluid lines where corrosion resistance and a leak-tight joint are required.
What are the specifications of the USA INDUSTRIALS pipe nipple?
This pipe nipple has a 1 1/2 in nominal pipe size, 24 in length, Schedule 40 wall, galvanized steel construction, and Male NPT x Male NPT connections. It includes pre-applied PTFE thread sealant and has a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipple worldwide?
3G Electric supplies the USA INDUSTRIALS pipe nipple worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized steel nipple with pre-applied PTFE sealant.
How to install a USA INDUSTRIALS pipe nipple?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten the nipple into the female fitting. Use a wrench on the nipple's hex section for final tightening—avoid over-torquing to prevent thread damage. The pre-applied sealant helps ensure a leak-free joint.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
