USA INDUSTRIALS Pipe Nipple: Aluminum, 4 in Nominal Pipe Size, 2 7/8 in Overall Lg, Fully Threaded
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, fully threaded aluminum pipe nipple with a 4 in nominal pipe size and 2 7/8 in overall length. It features Male NPT x Male NPT connections on both ends, with a…
SKU 3G-OTH-652368
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, fully threaded aluminum pipe nipple with a 4 in nominal pipe size and 2 7/8 in overall length. It features Male NPT x Male NPT connections on both ends, with a maximum operating pressure of 125 psi @ 72°F.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a USA INDUSTRIALS aluminum pipe nipple used for?
This Schedule 40 aluminum pipe nipple connects two male NPT threaded pipes or fittings in low-pressure fluid or air systems. It is commonly used in industrial plumbing, pneumatic lines, and general piping applications where corrosion resistance and lightweight material are needed.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-6084?
This fully threaded aluminum pipe nipple has a 4 in nominal pipe size, 2 7/8 in overall length, and Male NPT x Male NPT connections. It is Schedule 40 rated with a maximum operating pressure of 125 psi @ 72°F. The manufacturer part number is ZUSA-PF-6084.
Where to buy USA INDUSTRIALS pipe nipple ZUSA-PF-6084 worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS ZUSA-PF-6084 aluminum pipe nipple worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, regardless of location.
How to install a Schedule 40 aluminum pipe nipple?
Apply thread sealant or PTFE tape to both male NPT threads before assembly. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final tightening—avoid over-torquing to prevent thread damage. Ensure operating pressure stays below 125 psi @ 72°F.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
