USA INDUSTRIALS Pipe Nipple: 1/4 in Nominal Pipe Size, 3 1/2 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22358) is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 3 1/2 in length. It features male NPT threads on both ends with PTFE…
SKU 3G-OTH-464520
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22358) is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 3 1/2 in length. It features male NPT threads on both ends with PTFE thread sealant applied, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This USA INDUSTRIALS pipe nipple connects two male NPT threaded fittings in low-pressure water, air, or gas lines. Its galvanized steel resists corrosion in indoor plumbing and industrial piping systems. Rated for 125 psi @ 72°F, it suits general utility applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22358 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22358 is a Schedule 40, galvanized steel, welded pipe nipple with 1/4 in nominal pipe size, 3 1/2 in length, male NPT threads on both ends, PTFE thread sealant applied, and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-22358 or other sizes for your piping needs.
How to install a galvanized steel pipe nipple with PTFE sealant?
Apply pipe joint compound or PTFE tape over the factory-applied PTFE sealant for extra leak protection. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final tightening. Avoid overtightening to prevent thread damage.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
