USA INDUSTRIALS Pipe Nipple: 1/4 in Nominal Pipe Size, 18 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 18 in length. It features male NPT x male NPT connections with PTFE thread sealant applied on…
SKU 3G-OTH-464513
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 18 in length. It features male NPT x male NPT connections with PTFE thread sealant applied on both ends, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 1/4 in nominal pipe size, 18 in long galvanized steel nipple connects male NPT threaded fittings in low-pressure plumbing, air, water, and gas lines up to 125 psi @ 72°F. It is commonly used in industrial piping systems where corrosion resistance and a reliable threaded seal are required.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22369 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22369 is a Schedule 40, galvanized steel, welded pipe nipple with 1/4 in nominal size, 18 in length, male NPT x male NPT connections, PTFE thread sealant applied, and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, no matter the location. Contact us for availability and lead time.
How to install a threaded galvanized pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex section to achieve a snug, leak-free joint without overtightening. Do not exceed 125 psi @ 72°F operating pressure.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
