USA INDUSTRIALS Pipe Nipple: 1/2 in Nominal Pipe Size, 60 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 60 in length. It features male NPT threads on both ends with PTFE thread sealant, rated for a…
SKU 3G-OTH-464478
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 60 in length. It features male NPT threads on both ends with PTFE thread sealant, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a USA INDUSTRIALS Schedule 40 galvanized steel pipe nipple used for?
This pipe nipple connects two male NPT fittings in industrial plumbing, compressed air, and low-pressure fluid systems. Its 60-inch length bridges gaps in piping runs, while the galvanized coating resists corrosion. 3G Electric supplies this component across 14 industrial departments, including pneumatics and material handling.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22357 pipe nipple?
This pipe nipple has a 1/2 in nominal size, 60 in length, Schedule 40 wall, and galvanized steel construction. It uses male NPT x male NPT connections with PTFE thread sealant and is rated for 125 psi @ 72°F maximum operating pressure. 3G Electric sources this USA INDUSTRIALS part for global delivery.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide, handling full logistics and customs clearance. As a global industrial solutions provider since 1990, we source genuine parts like this Schedule 40 galvanized nipple across 14 departments. Contact us for availability and delivery to your location.
How to install a threaded galvanized steel pipe nipple?
Apply PTFE tape or pipe dope to the male NPT threads, then hand-tighten into the female fitting. Use wrenches on the nipple's hex section for final tightening—avoid over-torquing galvanized steel to prevent thread damage. 3G Electric recommends following standard piping practices for 125 psi systems.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
