USA INDUSTRIALS Pipe Nipple: 1 in Nominal Pipe Size, 2 1/2 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FK6) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 in nominal pipe size and 2 1/2 in length. It features Male NPT x Male NPT connections, PTFE thread sealant…
SKU 3G-OTH-473268
Need installation or engineering help?
Ask a question
Product Description
The USA INDUSTRIALS Pipe Nipple (SKU 407FK6) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 in nominal pipe size and 2 1/2 in length. It features Male NPT x Male NPT connections, PTFE thread sealant, and a maximum operating pressure of 125 psi @ 72°F.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a USA INDUSTRIALS pipe nipple used for?
This galvanized steel Schedule 40 pipe nipple connects two male NPT threaded fittings in plumbing, compressed air, and low-pressure fluid systems. It is commonly used in industrial piping, water lines, and structural applications where a durable, corrosion-resistant joint is needed.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22335 pipe nipple?
The USA INDUSTRIALS pipe nipple has a 1 in nominal pipe size, 2 1/2 in length, Schedule 40 wall thickness, galvanized steel construction, and welded seam. It uses Male NPT x Male NPT connections with PTFE thread sealant and is rated for 125 psi @ 72°F maximum operating pressure.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples and handles full logistics, customs clearance, and delivery to worldwide destinations. As a global industrial sourcing partner, we provide genuine parts like the ZUSA-PF-22335 with reliable lead times and compliance support for international orders.
How to install a galvanized steel pipe nipple?
Apply PTFE tape or pipe dope to the male NPT threads, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex section to achieve a snug seal without over-tightening. Avoid using on systems exceeding 125 psi @ 72°F to prevent joint failure.
Used in
Common applications for USA INDUSTRIALSUSA INDUSTRIALS Products
3G Electric supplies USA INDUSTRIALS schedule 40 threaded on both ends pipe & pipe nipples. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
