UHMW Polyethylene Bar: 0.125 in Thick, 4 in x 4 ft, Opaque, White
3G Electric supplies the UHMW Polyethylene Bar: 0.125 in Thick, a 4 in x 4 ft, opaque white acrylic adhesive backed sheet/bar with 4,400 psi tensile strength and 16.0 ft-lb/in impact strength (MPN BULK-PS-UHMW-612)…
SKU 3G-OTH-592469
Need installation or engineering help?
Ask a question
Product Description
3G Electric supplies the UHMW Polyethylene Bar: 0.125 in Thick, a 4 in x 4 ft, opaque white acrylic adhesive backed sheet/bar with 4,400 psi tensile strength and 16.0 ft-lb/in impact strength (MPN BULK-PS-UHMW-612). We interpret demand and deliver this genuine industrial material across 14 departments — with specialist depth in combustion, pumps and controls as an authorised distributor — ensuring you get the right solution, not just a catalog.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is UHMW Polyethylene Bar with acrylic adhesive used for?
This UHMW Polyethylene Bar (0.125 in thick, 4 in x 4 ft) with acrylic adhesive backing is used for wear strips, chute liners, and conveyor guides in material handling and packaging applications. Its low friction and high impact resistance protect equipment from abrasion and reduce noise.
What are the specifications of UHMW Polyethylene Bar BULK-PS-UHMW-612?
The UHMW Polyethylene Bar (MPN BULK-PS-UHMW-612) is 0.125 in thick, 4 in x 4 ft, opaque white, with acrylic adhesive backing. It has a tensile strength of 4,400 psi and an impact strength of 16.0 ft-lb/in. 3G Electric supplies this genuine material across 14 industrial departments.
Where to buy UHMW Polyethylene Bar with acrylic adhesive worldwide?
3G Electric supplies the UHMW Polyethylene Bar (BULK-PS-UHMW-612) worldwide. We handle full logistics, customs clearance, and delivery to your facility. As a global industrial solutions provider, we interpret your demand and deliver the right material — not just a catalog.
How to install UHMW Polyethylene Bar with acrylic adhesive backing?
Clean the surface thoroughly, remove the acrylic adhesive liner, and press the UHMW bar firmly into place. For best adhesion, apply at temperatures above 50 °F and use a roller to eliminate air bubbles. 3G Electric can advise on surface preparation for your specific substrate.
UHMW Products
3G Electric supplies UHMW acrylic adhesive backed uhmw polyethylene sheets & bars. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
