TIMKEN Pillow Block Bearing: 1 in Bore, Cast Iron, Set Screws, 1 27/64 in Shaft Ht
The TIMKEN SAS 1 is a general purpose pillow block ball bearing with a 1-inch bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a mounting bolt size of 3/8 inch and a shaft…
SKU 3G-OTH-104200
Also listed as: SAS1 · SAS-1
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN SAS 1 is a general purpose pillow block ball bearing with a 1-inch bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a mounting bolt size of 3/8 inch and a shaft height of 1 27/64 inches, with a maximum operating temperature of 200°F.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the TIMKEN SAS 1 pillow block bearing used for?
The TIMKEN SAS 1 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast iron housing and set screw locking provide reliable shaft retention in moderate-load, low-to-medium-speed applications.
What are the specifications of the TIMKEN SAS 1 pillow block bearing?
The TIMKEN SAS 1 has a 1-inch bore, cast iron housing, set screw locking, and a mounting bolt size of 3/8 inch. Shaft height is 1 27/64 inches, and maximum operating temperature is 200°F. It uses the inch system of measurement and is a general purpose ball bearing unit.
Where to buy the TIMKEN SAS 1 pillow block bearing worldwide?
3G Electric supplies the TIMKEN SAS 1 pillow block bearing worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this bearing to any country.
How to install the TIMKEN SAS 1 pillow block bearing?
To install the TIMKEN SAS 1, mount the bearing on a clean, level surface using 3/8-inch bolts through the base slots. Align the shaft with the bore, tighten the set screws onto the shaft with a hex key, and ensure the housing is not distorted. Follow standard pillow block installation practices for best results.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
