TIMKEN Pillow Block Bearing: 1/2 in Bore, Cast Iron, Set Screws, 1 11/64 in Shaft Ht
The TIMKEN Pillow Block Bearing is a general purpose ball bearing unit with a 1/2 in bore, designed for inch-system applications. This cast-iron housed bearing features set screw locking and a 1 11/64 in shaft…
SKU 3G-OTH-109307
Also listed as: SAS12 · SAS 1 2 · SAS-1-2
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN Pillow Block Bearing is a general purpose ball bearing unit with a 1/2 in bore, designed for inch-system applications. This cast-iron housed bearing features set screw locking and a 1 11/64 in shaft height, with a maximum operating temperature of 200°F. It requires a 3/8 in mounting bolt size and is identified by manufacturer part number SAS 1/2.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the TIMKEN SAS 1/2 pillow block bearing used for?
The TIMKEN SAS 1/2 is a general purpose pillow block bearing used to support rotating shafts in industrial machinery. It is suitable for light to moderate loads in conveyors, fans, and agricultural equipment, operating within inch-system applications up to 200°F.
What are the specifications of the TIMKEN SAS 1/2 pillow block bearing?
The TIMKEN SAS 1/2 has a 1/2 in bore, cast iron housing with set screw locking, a 1 11/64 in shaft height, and a 3/8 in mounting bolt size. It operates up to 200°F and uses inch-system measurements. The manufacturer part number is SAS 1/2.
Where to buy the TIMKEN SAS 1/2 pillow block bearing worldwide?
3G Electric supplies the TIMKEN SAS 1/2 pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the TIMKEN SAS 1/2 pillow block bearing?
Mount the bearing on a clean, flat surface using 3/8 in bolts. Align the shaft with the 1/2 in bore, tighten the set screws evenly, and ensure the shaft rotates freely. Do not exceed 200°F operating temperature. Follow TIMKEN's generic installation guidelines for best results.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose pillow block ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
