TIMKEN 4 Bolt Flange Bearing: Radial Ball, 1 3/8 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 3/8 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting and uses NLGI #2 equivalent…
SKU 3G-OTH-117685
Need installation or engineering help?
Ask a question
Product Description
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 3/8 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting and uses NLGI #2 equivalent lubricant. The bearing has a 4 5/8 in length, a square flange, and a mounting bolt size of 7/16 in, with the system of measurement in inches.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is used in industrial power transmission systems to support rotating shafts and reduce friction. It is commonly applied in conveyors, fans, and material handling equipment where a compact, rigid mounting is needed. The cast iron housing and set screw locking provide reliable shaft retention in moderate-load applications.
What are the specifications of the TIMKEN 4 Bolt Flange Bearing SCJ 1-3/8?
The TIMKEN SCJ 1-3/8 is a 4 bolt flange bearing with a 1 3/8 in cylindrical bore, cast iron housing, and set screw shaft locking. It has a square flange, 4 5/8 in length, and uses NLGI #2 equivalent lubricant. The mounting bolt size is 7/16 in, and the system of measurement is inch.
Where to buy TIMKEN 4 Bolt Flange Bearings worldwide?
You can source TIMKEN 4 Bolt Flange Bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the SCJ 1-3/8 model. We supply genuine TIMKEN bearings for industrial applications.
How to install a TIMKEN 4 Bolt Flange Bearing with set screws?
To install the TIMKEN 4 Bolt Flange Bearing, first clean the shaft and bore. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the 7/16 in bolts. Then, tighten the set screws evenly against the shaft using a hex key. Ensure the shaft rotates freely and lubricate per NLGI #2 equivalent grease recommendations.
Used in
Common applications for TIMKENTIMKEN Products
3G Electric supplies TIMKEN general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
