TECHSPRAY 1810-5F Rosin Flux Desoldering Braid, Size #3, 0.075 in x 5 ft, Green
The TECHSPRAY Desoldering Braid (MPN 1810-5F) is a rosin flux desoldering braid in size #3, 0.075 inches wide, and 5 feet long. It is green and ESD-safe, designed for removing solder from electronic assemblies.
SKU 3G-OTH-371010
Also listed as: 18105F · 1810 5F
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The TECHSPRAY Desoldering Braid (MPN 1810-5F) is a rosin flux desoldering braid in size #3, 0.075 inches wide, and 5 feet long. It is green and ESD-safe, designed for removing solder from electronic assemblies.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is TECHSPRAY Desoldering Braid used for?
TECHSPRAY Desoldering Braid (MPN 1810-5F) is used to remove solder from electronic assemblies during rework or repair. Its rosin flux coating aids solder absorption, and the ESD-safe construction protects sensitive components. It is ideal for PCB rework in electronics manufacturing and maintenance.
What are the specifications of TECHSPRAY Desoldering Braid 1810-5F?
The TECHSPRAY Desoldering Braid 1810-5F is size #3, 0.075 inches wide, and 5 feet long. It features rosin flux, a green color, and ESD-safe properties. The manufacturer part number is 1810-5F, and it is designed for efficient solder removal on electronic assemblies.
Where to buy TECHSPRAY Desoldering Braid in worldwide?
You can source the TECHSPRAY Desoldering Braid 1810-5F through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide locations. Contact us for availability and lead time on this rosin flux desoldering braid.
How to use TECHSPRAY Desoldering Braid for solder removal?
Place the TECHSPRAY Desoldering Braid over the solder joint, then apply a soldering iron tip on top. The braid absorbs molten solder via capillary action. Use a clean, tinned iron tip at appropriate temperature. The rosin flux enhances wetting. Always follow ESD-safe practices when handling sensitive electronics.
Used in
Common applications for TECHSPRAYTECHSPRAY Products
3G Electric supplies TECHSPRAY rosin flux desoldering braids. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- TECHFLEX Standard single-wall heat shrink tubing with a 0.98 in inner diameter before shrinking and 0.47 in after shrinking. Supplied in a 100 ft length, black color. Used for insulating, protecting, and bundling wires and cables in electrical installations, providing strain relief and resistance to abrasion, moisture, and chemicals
- TECHFLEX Standard heat shrink tubing for insulating and protecting electrical wires, cables, and connections. Shrinks from 0.24 in inner diameter to 0.12 in. Supplied in a 200 ft length, black color. Suitable for general wire management applications
- TECHFLEX Standard heat shrink tubing with 0.12 in inner diameter before shrinking and 0.06 in after shrinking. Supplied in a 500 ft length, black color. Used for insulating, protecting, and bundling wires and cables in electrical and electronic applications, providing strain relief and environmental sealing when heated
- TECHFLEX Standard heat shrink tubing for insulating, protecting, and bundling wires and cables. Black polyolefin tubing shrinks when heated to form a tight seal. Inside diameter before shrinking is 0.38 in, after shrinking is 0.19 in. Supplied in 200 ft length
- TECHFLEX Standard heat shrink tubing with a 3:1 shrink ratio. Before shrinking, inner diameter is 0.71 in; after shrinking, inner diameter is 0.24 in. Supplied in a 100 ft length, black color. Used for insulating and protecting electrical wires, cables, and connections from moisture, abrasion, and short circuits in industrial maintenance, automotive wiring, and panel building
- TECHFLEX Standard heat shrink tubing for insulating, protecting, and bundling wires and cables. Inner diameter shrinks from 1.97 in to 0.98 in upon heating. Supplied in a 100 ft length, black color. Suitable for use in control panels, motor leads, and junction boxes
