SEALMASTER 2 Bolt Flange Bearing: Radial Ball, 1 1/8 in Bore, Steel, Set Screws
The SEALMASTER SRF-18 is a 2 Bolt Flange Bearing, a stamped steel flange-mount radial ball bearing with a 1 1/8 in cylindrical bore. It features set screws, a mounting bolt size of 7/16 in, and is lubricated with…
SKU 3G-OTH-99184
Also listed as: SRF18 · SRF 18
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The SEALMASTER SRF-18 is a 2 Bolt Flange Bearing, a stamped steel flange-mount radial ball bearing with a 1 1/8 in cylindrical bore. It features set screws, a mounting bolt size of 7/16 in, and is lubricated with NLGI #2 Equivalent grease. This inch-system unit has an overall length of 5 3/8 in.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the SEALMASTER SRF-18 2 Bolt Flange Bearing used for?
The SEALMASTER SRF-18 is a stamped steel flange-mount radial ball bearing used to support rotating shafts in industrial machinery. It is commonly applied in conveyors, material handling equipment, and agricultural systems where a compact, rigid mounting solution is needed.
What are the specifications of the SEALMASTER SRF-18?
The SEALMASTER SRF-18 has a 1 1/8 in cylindrical bore, a 5 3/8 in overall length, and a 7/16 in mounting bolt size. It uses set screws for shaft retention, is lubricated with NLGI #2 Equivalent grease, and is designed for inch-system applications.
Where to buy the SEALMASTER SRF-18 worldwide?
You can source the SEALMASTER SRF-18 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the bearing reaches your facility reliably.
How to install the SEALMASTER SRF-18 flange bearing?
To install the SEALMASTER SRF-18, first clean the shaft and bore, then slide the bearing onto the shaft. Tighten the set screws evenly against the shaft using a hex key. Finally, bolt the flange to a flat mounting surface using 7/16 in bolts, ensuring alignment to prevent binding.
Used in
Common applications for SEALMASTERSEALMASTER Products
3G Electric supplies SEALMASTER stamped steel flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
