SEALMASTER Insert Bearing: ER-64, 4 in Bore, 7 15/32 in OD, 2.5 in Outer Ring Wd, Set Screws
The SEALMASTER ER-64 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, with an inch-system 4 in bore, 7 15/32 in OD, and 2.5 in outer ring width. It features double-sealed closure…
SKU 3G-OTH-100697
Also listed as: ER64 · ER 64
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The SEALMASTER ER-64 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, with an inch-system 4 in bore, 7 15/32 in OD, and 2.5 in outer ring width. It features double-sealed closure and set screw locking. This bearing is identified by industry number ER-64 and manufacturer part number ER-64.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the SEALMASTER ER-64 insert bearing used for?
The SEALMASTER ER-64 is a retaining-ring cylindrical insert bearing used in industrial power transmission and material handling equipment. Its radial/deep groove ball design supports moderate radial and axial loads, while the double-sealed closure protects against contaminants in harsh environments.
What are the specifications of the SEALMASTER ER-64 bearing?
The SEALMASTER ER-64 has a 4 in bore, 7 15/32 in OD, and 2.5 in outer ring width. It is a radial/deep groove ball insert bearing with double-sealed closure and set screw locking. The system of measurement is inch, and the industry number is ER-64.
Where to buy the SEALMASTER ER-64 bearing worldwide?
3G Electric supplies the SEALMASTER ER-64 bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this bearing to any international destination.
How to select the correct SEALMASTER ER-64 bearing for an application?
To select the SEALMASTER ER-64, verify the shaft diameter matches the 4 in bore and that the housing bore accommodates the 7 15/32 in OD. Confirm the load and speed requirements align with a radial/deep groove ball insert bearing. The double-sealed closure suits dirty or moist environments.
Used in
Common applications for SEALMASTERSEALMASTER Products
3G Electric supplies SEALMASTER retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
