SEALMASTER Insert Bearing: ER-38, 2 3/8 in Bore, 4 21/64 in OD, 1.25 in Outer Ring Wd
The SEALMASTER ER-38 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, featuring a double-sealed closure. It has a 2 3/8 in bore, a 4 21/64 in OD, and a 1.25 in outer ring width…
SKU 3G-OTH-100912
Also listed as: ER38 · ER 38
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The SEALMASTER ER-38 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, featuring a double-sealed closure. It has a 2 3/8 in bore, a 4 21/64 in OD, and a 1.25 in outer ring width, with set screws for shaft mounting. This inch-system bearing is identified by the industry number ER-38.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a SEALMASTER ER-38 insert bearing used for?
The SEALMASTER ER-38 is a retaining-ring cylindrical insert bearing used in industrial power transmission and material handling equipment. Its double-sealed radial/deep groove ball design handles moderate radial and axial loads, while set screws secure it to shafts in conveyors, fans, and agricultural machinery.
What are the specifications of the SEALMASTER ER-38 bearing?
The SEALMASTER ER-38 is an inch-system insert bearing with a 2 3/8 in bore, 4 21/64 in OD, and 1.25 in outer ring width. It features a double-sealed closure, set-screw shaft mounting, and is classified as a radial/deep groove ball type. The industry number is ER-38.
Where to buy SEALMASTER ER-38 bearings worldwide?
3G Electric supplies the SEALMASTER ER-38 insert bearing to customers worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance for international orders. Contact our team to source this bearing for your application.
How to install a SEALMASTER ER-38 set-screw bearing?
To install the SEALMASTER ER-38, clean the shaft and bearing bore, then slide the bearing onto the shaft. Tighten the set screws evenly to the manufacturer's recommended torque using a hex key. Ensure the retaining ring is seated properly in its groove before operation.
Used in
Common applications for SEALMASTERSEALMASTER Products
3G Electric supplies SEALMASTER retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
