SEALMASTER Insert Bearing: ER-26, 1 5/8 in Bore, 3 11/32 in OD, 1.094 in Outer Ring Wd
The SEALMASTER ER-26 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, with an inch-system bore of 1 5/8 in, an outer diameter of 3 11/32 in, and an outer ring width of 1.094 in. It…
SKU 3G-OTH-99698
Also listed as: ER26 · ER 26
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The SEALMASTER ER-26 is a retaining-ring cylindrical insert bearing of the radial/deep groove ball type, with an inch-system bore of 1 5/8 in, an outer diameter of 3 11/32 in, and an outer ring width of 1.094 in. It features double-sealed closure and set screw locking. This bearing is identified by the industry number ER-26.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the SEALMASTER ER-26 insert bearing used for?
The SEALMASTER ER-26 is a retaining-ring cylindrical insert bearing used in industrial power transmission and material handling equipment. Its radial/deep groove ball design supports moderate radial and axial loads, while the double-sealed closure protects against contaminants in harsh environments.
What are the specifications of the SEALMASTER ER-26 bearing?
The SEALMASTER ER-26 has a 1 5/8 in bore, 3 11/32 in outer diameter, and 1.094 in outer ring width. It is a radial/deep groove ball type with double-sealed closure and set screw locking. The system of measurement is inch, and the industry number is ER-26.
Where to buy the SEALMASTER ER-26 bearing worldwide?
3G Electric supplies the SEALMASTER ER-26 bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this bearing to any international destination.
How to install the SEALMASTER ER-26 insert bearing?
To install the SEALMASTER ER-26, first clean the shaft and housing bore. Slide the bearing onto the shaft, then tighten the set screws evenly to lock it in place. Ensure the retaining ring is properly seated in the housing groove. Follow standard bearing installation practices for inch-system components.
Used in
Common applications for SEALMASTERSEALMASTER Products
3G Electric supplies SEALMASTER retaining-ring cylindrical insert bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
