SEALMASTER 4 Bolt Flange Bearing: Radial Ball, 2 7/16 in Bore, Cast Iron
The SEALMASTER MSF-39 is a 4-bolt flange bearing of the radial ball type, featuring a 2 7/16 in cylindrical bore and a cast iron housing. It uses set screws for shaft locking and is lubricated with NLGI #2 equivalent…
SKU 3G-OTH-113565
Need installation or engineering help?
Ask a question
Product Description
The SEALMASTER MSF-39 is a 4-bolt flange bearing of the radial ball type, featuring a 2 7/16 in cylindrical bore and a cast iron housing. It uses set screws for shaft locking and is lubricated with NLGI #2 equivalent grease. The mounting bolt size is 5/8 in, and the system of measurement is inch.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the SEALMASTER MSF-39 4 bolt flange bearing used for?
The SEALMASTER MSF-39 is a general-purpose flange-mount ball bearing used in industrial power transmission systems. It supports rotating shafts in conveyors, fans, and material handling equipment. The cast iron housing and set-screw locking suit moderate-speed, moderate-load applications where alignment and easy mounting are needed.
What are the specifications of the SEALMASTER MSF-39 flange bearing?
The SEALMASTER MSF-39 has a 2 7/16 in cylindrical bore, a cast iron housing with set screws, and a 7 3/8 in length. It uses NLGI #2 equivalent grease, requires a 5/8 in mounting bolt, and is an inch-system radial ball bearing. The manufacturer part number is MSF-39.
Where to buy the SEALMASTER MSF-39 flange bearing worldwide?
You can source the SEALMASTER MSF-39 flange bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply genuine SEALMASTER components for international procurement.
How to install the SEALMASTER MSF-39 4 bolt flange bearing?
To install the SEALMASTER MSF-39, first clean the shaft and bore, then slide the bearing onto the shaft. Align the flange bolt holes with the mounting surface and tighten the 5/8 in bolts evenly. Finally, tighten the set screws against the shaft using the recommended torque. Lubrication is pre-applied with NLGI #2 grease.
Used in
Common applications for SEALMASTERSEALMASTER Products
3G Electric supplies SEALMASTER general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
