SAMMYS Rod Hanger for Steel
The SAMMYS Rod Anchor is a steel, zinc-plated rod hanger for steel, supplied in a 25-pack. It features a 1/4 in overall diameter, 1 in overall length, and 1/4 in screw size, with a horizontal mount type. This…
SKU 3G-OTH-521852
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The SAMMYS Rod Anchor is a steel, zinc-plated rod hanger for steel, supplied in a 25-pack. It features a 1/4 in overall diameter, 1 in overall length, and 1/4 in screw size, with a horizontal mount type. This inch-system anchor is not ICC approved for cracked or un-cracked concrete and is not seismic approved.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the SAMMYS Rod Anchor used for?
The SAMMYS Rod Anchor is a steel, zinc-plated rod hanger for steel, used to suspend threaded rod from steel structures in horizontal mount applications. It is suitable for light-duty industrial and commercial installations where seismic or cracked-concrete approvals are not required.
What are the specifications of the SAMMYS Rod Anchor?
The SAMMYS Rod Anchor has a 1/4 in screw size, 1 in overall length, and 1/4 in overall diameter. It is made of steel with zinc plating, comes in a 25-pack, and is designed for horizontal mounting. It is not ICC approved for cracked or un-cracked concrete and is not seismic approved.
Where to buy SAMMYS Rod Anchor worldwide?
3G Electric supplies the SAMMYS Rod Anchor worldwide, handling logistics, customs, and delivery to your site. As a global industrial solutions provider, we source genuine SAMMYS parts and can provide this 25-pack of rod anchors for steel. Contact us for availability and lead time.
How to install the SAMMYS Rod Anchor?
Install the SAMMYS Rod Anchor by inserting it into a pre-drilled hole in steel, then tightening the screw to secure the threaded rod. Ensure the mount is horizontal and the anchor is fully seated. Follow standard rod-hanger installation practices for steel structures; no special tools are required.
SAMMYS Products
3G Electric supplies SAMMYS rod hangers for steel. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- VERSAMATIC Copper flat sealing washer for use in diaphragm pump assemblies. Creates a leak-tight seal between mating surfaces to prevent fluid leakage in industrial transfer applications. Compatible with Sandpiper pump models SB1 and SGN5A
- HAMMOND This stainless steel enclosure measures 6 x 6 x 4 inches and includes an inner panel. It features clamp closure and is rated NEMA 12, 13, 3R, 4, and 4X for protection against dust, water, and corrosion. Suitable for housing electrical controls, terminals, and instruments in indoor or outdoor industrial environments
- AMS Stainless steel dredge with a hinged scissor jaw and trigger mechanism that holds the sampler open until contact with the surface. Used for collecting sediment or sludge samples from the bottom of water bodies for environmental or geotechnical analysis
- SESAMEE This long shackle combination padlock features a steel body and steel shackle, providing a vertical clearance of 2 1/4 inches. It is suitable for securing gates, sheds, lockers, and industrial enclosures where a keyless locking solution is preferred
- SESAMEE This SESAMEE long shackle combination padlock features a brass body and steel shackle, providing corrosion resistance and cut resistance. With a vertical clearance of 2 1/4 inches, it is suitable for securing lockers, gates, sheds, and toolboxes where extra clearance is needed. The resettable combination dial eliminates the need for keys
- SESAMEE This combination padlock features a brass body and steel shackle with a vertical clearance of 2 1/4 inches. The dial combo mechanism allows keyless operation. Suitable for securing lockers, gates, sheds, and toolboxes where a resettable combination lock is needed
