RIB CLC212-D15 Enclosed Pre-Wired Relay, 10 A, SPST-NO, 0.50 in NPT
The RIB Enclosed Pre-Wired Relay is a general purpose lighting control relay with a 10 A rating and SPST-NO contact configuration. This RIB-branded unit features a 0.50 in NPT nipple size and is identified by…
SKU 3G-OTH-36049
Also listed as: CLC212D15 · CLC212 D15
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The RIB Enclosed Pre-Wired Relay is a general purpose lighting control relay with a 10 A rating and SPST-NO contact configuration. This RIB-branded unit features a 0.50 in NPT nipple size and is identified by manufacturer part number CLC212-D15.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the RIB Enclosed Pre-Wired Relay used for?
The RIB Enclosed Pre-Wired Relay is a general purpose lighting control relay used in commercial and industrial lighting systems. It switches lighting loads on and off via a low-voltage control signal, making it suitable for building automation, energy management, and occupancy-based lighting control applications.
What are the specifications of the RIB CLC212-D15 relay?
The RIB CLC212-D15 is an enclosed pre-wired relay with a 10 A rating and SPST-NO contact configuration. It has a 0.50 in NPT nipple size for conduit mounting. This RIB-branded unit is designed for general purpose lighting control and carries the manufacturer part number CLC212-D15.
Where to buy the RIB CLC212-D15 relay worldwide?
You can source the RIB CLC212-D15 relay through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide reliable sourcing for this RIB lighting control relay.
How to install the RIB enclosed pre-wired relay?
Install the RIB relay by mounting it via the 0.50 in NPT nipple into a standard conduit knockout. Connect line voltage to the relay's input terminals and the lighting load to the output. Apply the low-voltage control signal to the coil terminals. Follow local electrical codes and ensure power is off before wiring.
Used in
Common applications for RIBRIB Products
3G Electric supplies RIB general purpose lighting control relays. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- RACO Aluminum C - Straight Type conduit outlet body with a 2 in trade size and 67 cu in capacity. Powder-coated finish with threaded hub for use with IMC. Provides a pull point or junction in conduit runs for wire pulling and splicing
- RULAND MANUFACTURING This general purpose clamp-on beam shaft coupling has a 5/16 in bore diameter with same bore dimensions, a round body, and inch dimensions. It accommodates up to 3° angular misalignment and is not keyed. Typical applications include motion control systems requiring precise shaft alignment
- RULAND MANUFACTURING Aluminum coupling with 15 mm bores on both ends, clamp-on design, no keyway. Accommodates 3° angular misalignment. Suitable for motion control, precision positioning, encoders, and light-duty power transmission
- RULAND MANUFACTURING This general purpose clamp-on beam shaft coupling from RULAND MANUFACTURING has a round body and metric dimensions. It features a 15 mm bore diameter for the first bore and accommodates up to 3° of angular misalignment. Suitable for motion control applications requiring precise shaft alignment and torque transmission
- RULAND MANUFACTURING This aluminum beam coupling has a 12 mm bore diameter 1 and accommodates up to 3° angular misalignment. It is used in motion control and light-duty power transmission applications to connect shafts while correcting misalignment. The clamp-on design secures without a keyway
- RULAND MANUFACTURING This clamp-on beam shaft coupling has an 11 mm bore diameter and accommodates up to 3° angular misalignment. It is used in motion control applications such as connecting shafts in servo motors, encoders, and linear actuators where precise shaft alignment is required
