RACO Conduit & Pipe Strap Clamp, Two-Hole: 1/2 in Trade Size, Steel
The RACO Conduit & Pipe Strap Clamp, Two-Hole (SKU 206F95, MPN 2092) is a steel surface mount clamp for 1/2 in EMT conduit and pipe. It features an electroplated gray finish, measures 2-9/32 in long by 19/32 in wide…
SKU 3G-OTH-04777
Need installation or engineering help?
Ask a question
Product Description
The RACO Conduit & Pipe Strap Clamp, Two-Hole (SKU 206F95, MPN 2092) is a steel surface mount clamp for 1/2 in EMT conduit and pipe. It features an electroplated gray finish, measures 2-9/32 in long by 19/32 in wide by 3/4 in high, with a steel thickness of 0.03 in, and is corrosion resistant. This cULus-listed clamp weighs 0.01 lb and is designed for screw-on mounting.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the RACO 2092 conduit strap clamp used for?
The RACO 2092 two-hole strap clamp is used to securely surface-mount 1/2 in EMT conduit and pipe in electrical installations. It is commonly applied in commercial and industrial settings to fasten conduit runs to walls, ceilings, or strut channels, ensuring mechanical support and code compliance.
What are the specifications of the RACO 2092 conduit clamp?
The RACO 2092 is a steel, two-hole strap clamp for 1/2 in EMT conduit. It has an electroplated gray finish, measures 2-9/32 in long by 19/32 in wide by 3/4 in high, with 0.03 in steel thickness. It is cULus listed, corrosion resistant, and weighs 0.01 lb. Mounting is screw-on.
Where to buy the RACO 2092 conduit clamp worldwide?
3G Electric supplies the RACO 2092 conduit strap clamp worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this cULus-listed clamp to any international destination.
How to install the RACO 2092 two-hole conduit strap?
To install the RACO 2092, position the clamp over the 1/2 in EMT conduit at the desired mounting point. Insert screws through the two holes into the supporting surface (wall, beam, or strut) and tighten securely. Ensure the conduit is fully seated in the clamp before final tightening to prevent movement.
Used in
Common applications for RACORACO Products
3G Electric supplies RACO surface mount clamps for conduit & pipe. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
