PLASTIC SUPPLY 90 Degree PVC Elbow for 8 in Duct, 5-Piece Set (PVCEC08)
The PLASTIC SUPPLY 90 Degree Elbow is a PVC elbow for 8 in duct diameter, featuring a 90° angle, 8 5/8 in inlet diameter, 16 in overall length, and sold in a 5-piece set (MPN PVCEC08).
SKU 3G-OTH-74661
Also listed as: PVCEC 08 · PVCEC-08
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The PLASTIC SUPPLY 90 Degree Elbow is a PVC elbow for 8 in duct diameter, featuring a 90° angle, 8 5/8 in inlet diameter, 16 in overall length, and sold in a 5-piece set (MPN PVCEC08).
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the PLASTIC SUPPLY PVCEC08 90 degree elbow used for?
This PVC 90 degree elbow is used to change the direction of ductwork by 90 degrees in industrial ventilation and exhaust systems. It is designed for 8-inch duct diameter and is commonly applied in fume extraction, dust collection, and air handling setups where corrosion-resistant PVC piping is required.
What are the specifications of the PLASTIC SUPPLY PVCEC08 elbow?
The PLASTIC SUPPLY PVCEC08 is a 90 degree elbow made of PVC, for 8-inch duct diameter. It has a 16-inch overall length, an 8 5/8-inch inlet diameter, and comes as a 5-piece assembly. The manufacturer part number is PVCEC08.
Where to buy the PLASTIC SUPPLY PVCEC08 elbow worldwide?
You can source the PLASTIC SUPPLY PVCEC08 elbow through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.
How to install a PVC 90 degree elbow like the PLASTIC SUPPLY PVCEC08?
To install, ensure the duct ends are clean and dry. Apply PVC primer and solvent cement to both the pipe end and the elbow socket, then insert fully with a slight twist. Hold for 30 seconds to set. Allow proper cure time per cement instructions before system use.
Used in
Common applications for PLASTIC SUPPLYPLASTIC SUPPLY Products
3G Electric supplies PLASTIC SUPPLY elbows. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
