PARKER Compression Fitting Coupling: 1/2 in Pipe x 12 mm OD Fitting Size, BSPP x Compression
The PARKER Compression Fitting Coupling is a standard sleeve brass compression fitting, type BSPP x Compression, Brass, with a 1/2 in Pipe x 12 mm OD fitting size (MPN 0114 12 21). 3G Electric interprets this demand…
SKU 3G-OTH-482152
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Coupling is a standard sleeve brass compression fitting, type BSPP x Compression, Brass, with a 1/2 in Pipe x 12 mm OD fitting size (MPN 0114 12 21). 3G Electric interprets this demand and sources the genuine PARKER part, providing a single point of accountability across 14 industrial departments — with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a PARKER compression fitting coupling used for?
A PARKER compression fitting coupling connects two pipes or tubes in industrial fluid systems. It joins a 1/2 in BSPP threaded pipe to a 12 mm OD tube using a brass compression sleeve, providing a leak-tight seal in pneumatic, hydraulic, and instrumentation applications.
What are the specifications of the PARKER 0114 12 21 compression fitting?
The PARKER 0114 12 21 is a standard sleeve brass compression fitting coupling. It has a BSPP x Compression connection type, with a 1/2 in pipe size on one end and a 12 mm OD tube size on the other. The body is made of brass for corrosion resistance.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies genuine PARKER compression fittings worldwide. We interpret your demand, source the correct part like the 0114 12 21, and handle full logistics and customs clearance for delivery to your site. Contact us for a quote and lead time.
How to install a PARKER brass compression fitting?
To install a PARKER brass compression fitting, cut the tube squarely, deburr the end, and slide the nut and sleeve onto the tube. Insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer torque specs. Avoid overtightening to prevent sleeve damage.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
