PARKER Push-Fit Elbow Fitting: 1/2 in OD x 3/8 in Pipe Fitting Size, Push-to-Connect x MNPT
The Parker Push-Fit Elbow Fitting (MPN VS179PTC-8-6) is a brass air brake fitting with a 1/2 in OD x 3/8 in Pipe Fitting Size, configured as a Push-to-Connect x MNPT adapter. It features Vibra-Seal thread sealant for…
SKU 3G-OTH-741801
Need installation or engineering help?
Ask a question
Product Description
The Parker Push-Fit Elbow Fitting (MPN VS179PTC-8-6) is a brass air brake fitting with a 1/2 in OD x 3/8 in Pipe Fitting Size, configured as a Push-to-Connect x MNPT adapter. It features Vibra-Seal thread sealant for secure connections. 3G Electric interprets your demand for this genuine industrial component, sourcing it across 14 departments—including pneumatics—with specialist depth in controls to support your application.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the Parker VS179PTC-8-6 push-fit elbow fitting used for?
The Parker VS179PTC-8-6 is a brass air brake fitting used to connect tubing to threaded ports in pneumatic systems. It is commonly applied in commercial vehicle air brake lines, industrial pneumatics, and fluid power circuits where a leak-free, push-to-connect joint is required.
What are the specifications of the Parker VS179PTC-8-6 fitting?
This Parker push-fit elbow fitting has a 1/2 in OD tube size and 3/8 in MNPT pipe thread. It is made of brass with a Push-to-Connect x MNPT adapter configuration. The thread sealant type is Vibra-Seal, which helps prevent leaks at the threaded connection.
Where to buy Parker VS179PTC-8-6 fittings worldwide?
3G Electric supplies the genuine Parker VS179PTC-8-6 push-fit elbow fitting worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial sourcing partner, we interpret your demand and provide this component across 14 departments, including pneumatics and controls.
How to install a Parker push-to-connect elbow fitting?
To install, cut tubing square, deburr, and push fully into the fitting until it stops. For the threaded end, apply thread sealant—Parker specifies Vibra-Seal on this model—and tighten to the port. Ensure no side load on the fitting. Test for leaks before pressurizing the system.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER brass air brake fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
