PARKER Compression Fitting Elbow: 1/2 in OD x 3/8 in Pipe Fitting Size, Compression x MNPT
The PARKER Compression Fitting Elbow (MPN 179C-8-6) is a standard sleeve brass compression fitting with a 1/2 in OD x 3/8 in Pipe Fitting Size, configured as Compression x MNPT and sold in a 10-pack. This product is…
SKU 3G-OTH-481910
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 179C-8-6) is a standard sleeve brass compression fitting with a 1/2 in OD x 3/8 in Pipe Fitting Size, configured as Compression x MNPT and sold in a 10-pack. This product is part of 3G Electric's broad industrial supply across 14 departments, with specialist depth in combustion, pumps, and controls as an authorised distributor for brands including PARKER, ensuring we interpret demand and deliver the right solution.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a PARKER compression fitting elbow used for?
A PARKER compression fitting elbow connects tubing to threaded ports at a 90-degree angle, creating a leak-tight seal in pneumatic, hydraulic, and instrumentation systems. It is commonly used in industrial fluid power, process control, and lubrication applications where space is limited.
What are the specifications of the PARKER 179C-8-6 compression fitting elbow?
The PARKER 179C-8-6 is a standard sleeve brass compression fitting elbow with a 1/2 in OD tube size and 3/8 in MNPT pipe thread. It is configured as Compression x MNPT and sold in a 10-pack. The brass construction provides corrosion resistance for general industrial use.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings worldwide, handling full logistics and customs clearance for global delivery. As a sourcing partner across 14 industrial departments, we interpret your demand and deliver the right solution, including the PARKER 179C-8-6 elbow, to any international destination.
How to install a PARKER compression fitting elbow?
To install a PARKER compression fitting elbow, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Avoid over-tightening to prevent tube deformation. Always verify thread compatibility with the MNPT port.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
