PARKER Compression Fitting Elbow: 3/8 in OD x 3/8 in Pipe Fitting Size, Compression x MNPT
The PARKER Compression Fitting Elbow (MPN 179C-6-6) is a standard sleeve brass compression fitting with a 3/8 in OD x 3/8 in Pipe Fitting Size, configured as Compression x MNPT and sold in a 10-pack. This product is…
SKU 3G-OTH-482258
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 179C-6-6) is a standard sleeve brass compression fitting with a 3/8 in OD x 3/8 in Pipe Fitting Size, configured as Compression x MNPT and sold in a 10-pack. This product is part of 3G Electric's broad industrial supply across 14 departments, with specialist depth in combustion, pumps, and controls ensuring accurate sourcing and support.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a PARKER compression fitting elbow used for?
A PARKER compression fitting elbow connects two tubes or a tube to a pipe at a 90-degree angle, creating a leak-tight seal in pneumatic, hydraulic, and instrumentation systems. It is commonly used in industrial fluid power, process control, and HVAC applications where reliable, vibration-resistant connections are required.
What are the specifications of the PARKER 179C-6-6 compression fitting elbow?
The PARKER 179C-6-6 is a standard sleeve brass compression fitting elbow with a 3/8 in OD tube size and 3/8 in pipe fitting size, configured as Compression x MNPT. It is sold in a 10-pack. This fitting is designed for use with copper, brass, or plastic tubing in low- to medium-pressure systems.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings worldwide, handling full logistics and customs clearance for international delivery. As a global industrial solutions provider, we source genuine PARKER parts like the 179C-6-6 elbow across 14 departments, with specialist expertise in combustion, pumps, and controls to ensure accurate order fulfillment.
How to install a PARKER compression fitting elbow?
To install a PARKER compression fitting elbow, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer specifications. Avoid over-tightening to prevent tube deformation. Always use a tube cutter for a clean, square cut before assembly.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
