PARKER Compression Tee Fitting: 3/8 in OD x 3/8 in Pipe x 3/8 in OD Fitting Size, Brass
The PARKER Compression Tee Fitting (MPN 172C-6-6) is a standard sleeve brass compression fitting, supplied in a 10-pack. It accommodates a 3/8 in OD x 3/8 in Pipe x 3/8 in OD fitting size, providing a reliable…
SKU 3G-OTH-482062
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Tee Fitting (MPN 172C-6-6) is a standard sleeve brass compression fitting, supplied in a 10-pack. It accommodates a 3/8 in OD x 3/8 in Pipe x 3/8 in OD fitting size, providing a reliable connection point in tubing systems.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the PARKER Compression Tee Fitting used for?
The PARKER Compression Tee Fitting (172C-6-6) creates a branch connection in brass tubing systems. It joins one 3/8 in pipe thread and two 3/8 in OD tube ends, commonly used in instrumentation, pneumatic, and hydraulic circuits where a reliable, leak-resistant junction is needed.
What are the specifications of the PARKER 172C-6-6 fitting?
This PARKER standard sleeve brass compression tee has a 3/8 in OD x 3/8 in Pipe x 3/8 in OD fitting size. It is supplied in a 10-pack (MPN 172C-6-6). The brass construction resists corrosion and provides durable sealing in medium-pressure fluid and gas applications.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings like the 172C-6-6 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact our team for a quote on this 10-pack brass tee or other PARKER tube fitting configurations.
How to install a PARKER compression tee fitting?
Cut the tubing square, deburr the end, and slide the nut and sleeve onto the tube. Insert the tube fully into the PARKER tee body, then tighten the nut by hand plus 1-1/4 turns with a wrench. Avoid over-tightening to prevent sleeve deformation. Always verify with a pressure test.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
