PARKER Compression Fitting Elbow: 5/16 in OD x 1/8 in Pipe Fitting Size, Compression x MNPT
The PARKER Compression Fitting Elbow (MPN 169CA-5-2) is a self-aligning brass compression fitting with a 5/16 in OD x 1/8 in pipe fitting size, configured as Compression x MNPT and sold in a 10-pack. This component…
SKU 3G-OTH-470678
Also listed as: 169CA52 · 169CA 5 2
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 169CA-5-2) is a self-aligning brass compression fitting with a 5/16 in OD x 1/8 in pipe fitting size, configured as Compression x MNPT and sold in a 10-pack. This component enables secure tube-to-pipe connections in industrial fluid systems.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a PARKER compression fitting elbow used for?
A PARKER compression fitting elbow connects tubing to threaded pipe ports at a 90-degree angle. It is used in industrial fluid systems for air, water, oil, or gas lines where a leak-tight, vibration-resistant joint is required without soldering or flaring.
What are the specifications of the PARKER 169CA-5-2 compression fitting?
The PARKER 169CA-5-2 is a self-aligning brass compression fitting elbow. It has a 5/16 in OD tube size and a 1/8 in MNPT pipe thread. The configuration is Compression x MNPT, and it is sold in a 10-pack. The brand is PARKER.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings like the 169CA-5-2 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this 10-pack of brass elbows.
How to install a PARKER compression fitting elbow?
To install a PARKER compression fitting elbow, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand plus 1-1/4 turns with a wrench. Do not overtighten. Use thread sealant on the MNPT end for pipe connections.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
