PARKER 1 HP-B CA360 Brass NPT Threaded Plug, 1 in, 3,000 psi
The PARKER 1 HP-B is a threaded extreme-pressure hydraulic pipe fitting, specifically a CA360 brass plug with 1 in NPT threading and a 1 1/4 in length. It is rated for a maximum operating pressure of 3,000 psi.
SKU 3G-OTH-460244
Also listed as: 1HPB · 1 HP B · 1-HP-B
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The PARKER 1 HP-B is a threaded extreme-pressure hydraulic pipe fitting, specifically a CA360 brass plug with 1 in NPT threading and a 1 1/4 in length. It is rated for a maximum operating pressure of 3,000 psi.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the PARKER 1 HP-B plug used for?
The PARKER 1 HP-B is a threaded extreme-pressure hydraulic pipe fitting used to seal ports in high-pressure hydraulic systems. It is commonly applied in industrial fluid power circuits, hydraulic manifolds, and heavy machinery where a reliable, leak-proof closure is required at pressures up to 3,000 psi.
What are the specifications of the PARKER 1 HP-B?
The PARKER 1 HP-B is a CA360 brass plug with 1 in NPT threading, 1 1/4 in length, and a maximum operating pressure of 3,000 psi. It is designed for extreme-pressure hydraulic pipe fitting applications and is manufactured by PARKER under part number 1 HP-B.
Where to buy the PARKER 1 HP-B worldwide?
3G Electric supplies the PARKER 1 HP-B worldwide, handling full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine PARKER threaded extreme-pressure hydraulic pipe fittings and support procurement across all regions.
How to install the PARKER 1 HP-B plug?
To install the PARKER 1 HP-B plug, clean the NPT threaded port, apply a compatible thread sealant, and hand-tighten the plug into the port. Use a wrench to tighten to the manufacturer's recommended torque, avoiding over-tightening to prevent damage to the brass fitting. Always depressurize the system before installation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER threaded extreme-pressure hydraulic pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
